Burnouts For Deals Sale: Burnouts & Deals All Week Long!

Steeda Billet Mustang Oil Separator (1979-2019)

4 Review(s)
$60.00 (35%)
Our oil separator is crafted from aerospace grade billet aluminum for light weight and great looks. Connects to PCV hose to prevent oil and crankcase vapors from getting into the intake manifold and decreasing your fuel octane.
Part Number: 555 3713
Write a Review


Our oil separator is crafted from aerospace grade billet aluminum for light weight and great looks. Connects to PCV hose to prevent oil and crankcase vapors from getting into the intake manifold and decreasing your fuel octane.

Fully sealed to ensure no vacuum leaks, and simple to service. Holds up to three ounces of fluid for service intervals lapsing each oil change.

Looks great and matches with the rest of our line of underhood dress up items.

Includes hardware for installation.

Natural Billet Aluminum Construction, not engraved. Comes with OEM vacuum hose for 11-14 GT's. Designed for 3/8" and 1/2" PCV systems.

Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations.

Note: Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

This limited warranty is the only express warranty applicable to Steeda Autosports products. Other rights may arise or vary from state to state in the United States. Steeda is not responsible for any time for which you may lose the use of your vehicle, any inconvenience you might be caused, the loss of your transportation or any part thereof, or any other incidental or consequential damages you may have.

Product Benefits
  • Fits any car with a 3/8" or 1/2" vacuum system
  • Lightweight Aerospace Grade Aluminum
  • Matches Steeda's line-up of bling caps
  • Simple to service

CA Residents: Cancer and Reproductive Harm WARNING www.p65warnings.ca.gov.

Fitment & Features


Manufacturer: Steeda Autosports
Made in USA: Yes

Installation Information:

Level of Difficulty: Easy
Install Time: About 30 Minutes
Tools Required: Basic Shop Tools

Vehicle Fitment:

Fits Model Year: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

Customer Reviews

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings


07 SGT
Received quickly, well packaged, very good quality item. Good instruction and easy install. Ordered extra filter at same time to save on shipping cost.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Illinois on 3/31/2020
Another great product, with top notch quality
Another great product, with top notch quality. This is a universal deal, so you have to make it work (2015-2015 S550). I use the black fitting even though I took a photo of the aluminum ones. I use a single straight one on the drivers and the 90 elbow on the passenger side. I did have to cut the stock plastic tub to splice this in. I used a Dremel with a cut off wheel. I did need to heat the tube a little to get it to line up perfect. Then I just crimped the clamps. Done, in less than 20 minutes.
Did you find this helpful?  4 of 4 Found Helpful
Reviewed by:  from Florida on 12/13/2015
Very impressed
Looks good, good price, and very impressed with how much oil it actually catches. Makes me regret not having one sooner. Think I may get another for my Shelby's driver side.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Georgia on 5/26/2015
Great addition to the engine bay!
Excellent workmanship in making this item. It was very easy to install, just make sure you measure before you cut the tubing. Just installed it so haven't gotten any oil in to report. Great buy, thank you Steeda
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Texas on 2/1/2014
There are no reviews for this product!

Related Items

Back to TOP
0 Items