By lowering your S550 Mustang, you have consequently lowered the front roll center. This leads to symptoms you have
likely experienced: reduced steering response, increased body roll, and reduced cornering grip.
Solution:
Steeda's industry-first S550 Mustang Front Control Arm, a must for all lowered 2015+ Mustangs. This arm is
manufactured to exceed OE Performance Pack specifications, with one major benefit: roll center correction.
By increasing the ball stud height on the lateral links, Steeda has eliminated the adverse effects of lowering your vehicle by raising the front roll center. This, in turn, helps to increase steering response, decrease body roll, and increase cornering grip, helping you turn even better lap times!
These are a must for any S550 Mustang owner looking a bolt-on suspension upgrade to increase handling performance.
Use in conjunction with our 555-8133 - Steeda S550 Mustang Bumpsteer Kit for best results.
- Corrects the front roll center on vehicles lowered 0.5" or more
- Achieve up to -3.3 degrees of camber adjustment*
- Decreases body roll
- Improves tire contact patch with the road
- Increased cornering grip
- Sold as pair
- Race-proven performance
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Installation Difficulty:
- Easy
- Tools Required:
- Basic Shop Tools
- Estimated Install Time:
- (approx.) 1 Hour
- Vehicle Fitment:
- 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
- Vehicle Trim:
- V6
- Vehicle Trim:
- GT
- Vehicle Trim:
- EcoBoost
- Vehicle Trim:
- Bullitt
- Vehicle Trim:
- Mach 1
- Vehicle Trim:
- GT350
- Vehicle Trim:
- GT500
-
Steeda S550 Mustang Front Lower Control Arm Lateral Link w/ Extended Ball Joint | Overview
https://www.steeda.com/Steeda-S550-Mustang-Front-Control-Arm-L...
-
Steeda HPDE Q500 Timed Club Course Hot Lap, Sebring International Raceway
https://www.steeda.com/steeda-2018-q500-hpde-car This past we...
-
Steeda Q500, Front Suspension Point of View (POV)
https://www.steeda.com/2015-2019-mustang-suspension In this vi...
