Stock rotors on the Mustang EcoBoost Performance Package work hard for a four-cylinder, and when replacement time comes, a rotor that simply matches OEM spec is the minimum acceptable standard. EBC's RK7696 clears that bar and adds meaningful upgrades: a thermic black anti-rust coating, full dynamic balancing, and runout testing before the part ever leaves the factory.
Premium G3000 cast iron construction. G3000-grade iron matches or exceeds the density and heat-absorption characteristics of the original rotors, giving the rear brakes consistent bite through repeated stops without the glazing or cracking that cheaper metallurgy can produce.
Thermic black anti-rust coating. The coating seals the rotor surface and hat against the corrosion that causes brake judder and uneven pad transfer, a common complaint on vehicles that sit between track days or autocross weekends. Corrosion resistance keeps the rotor surface true long after bare-iron alternatives have started pitting.
Balanced and runout-tested at the factory. Every RK7696 rotor ships after a full balance check and runout measurement, so the pulsation and steering-wheel shimmy that can come from an out-of-tolerance replacement rotor is eliminated before installation rather than discovered afterward.
Direct fit with no modifications. The RK7696 mounts to the rear hub of the 2015-2023 Mustang EcoBoost Performance Package without drilling, spacers, or hardware changes. Swap the old rotor off, slide the new one on, and torque to spec.
Product Benefits
- Fitment: Direct OEM-replacement fit for 2015-2023 Mustang EcoBoost Performance Package, rear axle.
- G3000 Iron Grade: Premium cast iron formulation for consistent thermal performance and wear resistance.
- Thermic Black Coating: Anti-rust surface treatment protects the rotor face and hat from corrosion.
- Factory Balanced: Dynamically balanced to eliminate vibration and brake pedal pulsation.
- Runout Tested: Each rotor is measured for runout before shipping to ensure OEM-spec tolerances.
- No Modifications Required: Installs directly over the stock rear hub with no changes to existing hardware.
- 10,000-Mile, 12-Month Warranty: Backed by EBC's no-hassle warranty against defects in materials and workmanship.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake kits for street, track, and off-road applications across a wide range of performance and daily-driver vehicles. The RK series represents EBC's OE-replacement line, built to factory dimensions with additional quality controls that go beyond minimum OEM requirements.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | EcoBoost Premium, EcoBoost, GT 50 Years Limited Edition, GT Premium, GT, V6, Bullitt, Mach 1 |
| Vehicle Fitment | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| FMSI Pad No. | D1793 |
