Stock rotors on the Mustang EcoBoost Performance Package are optimized for daily driving, not the repeated hard stops that come with a car tuned to punch above its displacement. EBC's GD7694 GD Sport rotors give the front axle a properly heat-managed, corrosion-resistant upgrade built to handle the demands of performance use.
Wide-aperture slots pull heat out of the contact zone. EBC's slot geometry draws cool air under the pad-to-rotor interface during hard braking, where temperatures can exceed 1,000 degrees Fahrenheit at the pad's core. That active cooling effect reduces the risk of brake fade and maintains consistent pedal feel when the rotors are worked hardest.
Dimple drilling without the cracking risk. EBC pioneered the dimple-drilled rotor design in the 1990s as an alternative to through-drilling. Full holes weaken the rotor's structure and promote cracking under thermal stress; dimples deliver the same pad degassing benefit without compromising rotor integrity.
Third-generation corrosion protection keeps them looking right. Every GD series rotor ships with a silver corrosion-resistant finish that holds up against road grime, moisture, and the salt exposure that eats bare iron quickly. The finish covers the hat and vanes, not just the swept surface.
100% inspected before release. EBC subjects every rotor to a full runout check, metallurgy verification, and dimensional inspection at its manufacturing facility. All sport rotors are slotted and balanced at either the Las Vegas or UK EBC facility, and GD series blanks are R90-approved with the majority cast in EU-accredited foundries operating to ISO and BS5750 standards.
Product Benefits
- Wide-Aperture Slots: Channel cool air beneath the pad contact area to reduce heat buildup and resist fade.
- Dimple-Drilled Design: Promotes pad degassing and wipes the pad face clean without the structural weakness of through-drilled holes.
- Third-Generation Corrosion Finish: Long-lasting silver coating resists rust on the hat, vanes, and rotor body.
- R90-Approved Blanks: Cast in EU facilities accredited to ISO and BS5750 quality standards.
- 100% Quality Inspection: Every rotor passes runout, metallurgy, and dimensional checks before shipment.
- Balanced at the Factory: All GD sport rotors are balanced and runout-inspected post-slotting for vibration-free installation.
- Direct Fit: Designed specifically for the 2015-2023 Mustang EcoBoost Performance Package front axle.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake lines for street, track, and off-road applications. Rotor ranges are manufactured and finished in facilities operating under ISO and TÜV certification, with every sport rotor slotted, balanced, and inspected at EBC's Las Vegas or UK operations before release.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | EcoBoost Premium, EcoBoost, V6 |
| Vehicle Fitment | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| FMSI Pad No. | D1792 |
