Stock rotors on a 5.0-equipped Mustang handle daily commutes, but push hard into a corner or carry speed through repeated stops and the thermal limits become obvious fast. EBC's GD7426 GD Sport rotors give the 2010-2014 Mustang 5.0 with Brembo calipers a front rotor upgrade that manages heat, expels debris, and resists corrosion far beyond what the factory unit delivers.
Wide-aperture slots do more than look aggressive. EBC's slot geometry actively draws cool air beneath the pad-to-rotor interface, where temperatures can exceed 1,000 degrees during heavy braking. Lower contact temperatures translate directly to reduced brake fade and more consistent pedal feel through repeated stops.
Dimple drilling without the cracking risk. EBC pioneered the dimple-drilled rotor in the 1990s as a way to provide pad degassing without through-drilling full holes into the disc. Through-drilling creates stress concentration points that can lead to rotor cracks under repeated thermal cycling; dimple drilling delivers the same degassing benefit while preserving rotor integrity.
Third-generation corrosion protection. Every GD series rotor ships with a silver corrosion-resistant finish that keeps the rotor looking clean between pad changes and prevents the surface rust that accelerates uneven wear. The finish holds up through wash cycles, rain, and road salt without flaking or interfering with pad bed-in.
Precision controlled from blank to finished rotor. GD series rotors are 100% machined in the United Kingdom from R90-approved blanks, with the majority of castings sourced from EU foundries certified to ISO and BS5750 standards. Every finished rotor passes a 100% runout check, dimensional inspection, and metallurgical verification before it ships. Slotting is performed in-house at EBC's UK or Las Vegas facility, and each rotor is balanced and runout-inspected a final time before release.
Product Benefits
- Brembo-Caliper Fitment: Sized specifically for 2010-2014 Mustang 5.0 models equipped with Brembo front brakes.
- Wide-Aperture Slots: Channel cool air under the pad contact surface and expel heat, water, dust, and debris.
- Dimple-Drilled Design: Provides pad degassing without the structural weaknesses associated with through-drilled holes.
- R90-Approved Blanks: Machined from certified blanks to meet European road safety standards.
- Silver Corrosion-Resistant Finish: Third-generation coating protects against rust and surface corrosion between services.
- 100% Quality Inspection: Every rotor undergoes runout, dimensional, and metallurgical checks plus a final balance check before release.
- ISO and BS5750 Certified Production: Cast in accredited EU foundries and finished in EBC's own UK or US facilities.
About EBC Brakes: EBC Brakes is a UK-based brake specialist that manufactures rotors, brake pads, and brake lines for street, track, and off-road applications. Production spans facilities in the United Kingdom and the United States, with quality controls that include 100% dimensional, metallurgical, and runout verification on every rotor before it leaves the facility.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Shelby GT500, Shelby GT500KR |
| Vehicle Fitment | 2007, 2008, 2009, 2010, 2011, 2012 |
| FMSI Pad No. | D1050 |
