Stock brakes on the Focus ST MK3 2.0T handle daily driving, but push them through repeated hard stops or a track session and fade sets in fast. The EBC Racing Apollo-4 Big Brake Kit replaces the front calipers, rotors, and hardware with a purpose-built system rated for sustained high-performance use, then goes further by including rear friction pads and braided lines for both axles so the entire brake system stays balanced.
Balanced braking, front to rear. Most big brake kits stop at the front axle, leaving the rear to limit overall system performance. This kit ships complete with matching Yellowstuff rear pads and braided stainless brake lines for both front and rear, ensuring pedal feel, bite, and fade resistance are consistent across all four corners rather than mismatched.
Apollo-4 four-piston calipers, anodized and UK-built. Every Apollo-4 caliper is cast, machined, painted, and assembled in the United Kingdom. Caliper brackets and disc bells are machined from aerospace-grade billet aluminum for high strength with low unsprung weight. Every metal caliper fitting and disc drive bobbin uses stainless steel construction to prevent corrosion and extend service life.
355mm rotors with Yellowstuff pads. The 355mm front rotors provide a larger swept area than the factory setup, increasing thermal capacity and reducing rotor temperatures under repeated braking. EBC's Yellowstuff compound pads, included front and rear, deliver fast street and track performance with strong initial bite and consistent friction across a wide temperature range.
Complete hardware included. Every bracket, bolt, bleed nipple, and fitting needed to fully replace the equivalent OEM components ships in the kit. No sourcing additional hardware, no partial installs.
Product Benefits
- Balanced System Upgrade: Front calipers and rotors plus rear pads and braided lines for all four corners.
- Apollo-4 Calipers: Anodized four-piston units cast, machined, and assembled in the UK.
- Aerospace-Grade Aluminum: Caliper brackets and disc bells machined from billet aluminum for strength and reduced weight.
- Stainless Steel Hardware: Every caliper fitting and disc drive bobbin resists corrosion for long service life.
- 355mm Front Rotors: Larger swept area increases thermal capacity and reduces fade under sustained braking.
- Yellowstuff Pads Included: EBC's flagship fast-street and track compound ships with the kit for front and rear.
- Braided Brake Lines: Front and rear stainless braided lines provide a firmer, more consistent pedal feel.
- MK3 Focus ST Direct Fit: Engineered specifically for the 2011-2018 Focus ST 2.0T, front axle fitment.
- UK Engineered and Assembled: Designed, manufactured, and built in the United Kingdom.
About EBC Racing: EBC Brakes has manufactured friction and braking products in the United Kingdom for decades, covering applications from street performance to professional motorsport. The Apollo Series calipers represent EBC's commitment to keeping design, machining, and assembly on home soil while delivering brake kit performance at a competitive price point.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | ST |
| Vehicle Fitment | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
