Steeda Mustang Alignment Kit for the S550 Rear Subframe for BMR CB005 / SR Kit (2015-2019 All)

Steeda Mustang Alignment Kit for the S550 Rear Subframe for BMR CB005 / SR Kit (2015-2019 All)
555 4447
$39.95
$49.95
$10.00(20%)

Description

Product Install Instructions

You asked and Steeda listened! The team here at Steeda went hard to work when we started fielding calls of the rear subframe being misaligned from the factory and there being no solution with the BMR CB005 / SR Performance IRS Tie Down kits. So here you have it, Steeda's new S550 IRS subframe alignment kit for the BMR CB005 / SR Performance IRS Tie Down kits!

The S550's subframe mounting holes are very large compared to the subframe mounting bolts. Since there is a large difference in bolt and hole size, the subframe can be mis-aligned from the factory up to 1/2" left to right. The Steeda S550 Mustang IRS Subframe Alignment Kit is made from CNC-machined Delrin to avoid putting two dissimilar metals next to each other like the competition, preventing corrosion. Delrin is also less weight then aluminum or steel inserts and therefore keeping performance in mind. The Delrin sleeves slide into the subframe mounting holes, and fill the extra space left between the subframe mount and bolt from the factory.

Our Steeda S550 Mustang IRS Subframe Alignment Kit guarantees that the subframe will be bolted to the same location every time it is lowered. Eliminating the need for unnecessary alignments.

Product Benefits

  • Easy to install
  • No permanent modifications
  • Correctly align the rear end
  • Aligns rear ends with BMR CB005 Kit & SR Performance IRS Tie Down Kit
  • No increase in NVH
  • Made in the USA

Note: Note: An alignment is needed upon initial installation, due to the fact it could have been mis-aligned from the factory and with it now being squared in the chassis, some adjustments might need to be made. This part is designed to fit with BMR CB005 & SR Performance IRS Tie Down Kits. Purchase your Steeda Alignment Kit for the S550 Rear Subframe for BMR CB005 / SR Performance for your 2015-2019 Mustang at Steeda Autosports today

MPN: 555-4447

Fitment & Features

Manufacturer
Manufacturer: Steeda Autosports
Made in USA: Yes

Installation Information
Tools Required: Basic Tools
Time of Install: About 1 Hour
Level of Difficulty: Tech Recommended

Customer Reviews

Keep your IRS Inline
The IRS is notorious for moving around a shifting. If you plan on doing any work to your car you wanna make sure that it goes back in the same spot every time, especially important if you track your car. This kit will make it where you don’t have to worry about any shifting in the IRS. Easily one of the top 5 things you immediately need for the mustang!!!
Did you find this helpful? 
Reviewed by:  from Acworth. on 6/12/2018
5/5
Centered IRS
Installing these was difficult since this does center your rear sub frame and my rear sub-frame was not perfectly aligned. After some finesse and grit I was able to get this installed. The vehicle along with the BMR CB005 is an amazing modification that will yield instant performance results.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by: (Verified Buyer)  from Illinois. on 3/27/2018
5/5
There are no reviews for this product!

More races are won...more track records are set...and more championships are captured with vehicles using Steeda performance parts than any other brand.

Steeda, the world's largest aftermarket manufacturer of Ford performance equipment, is the leader in parts and upgrades for Mustang, Fusion, Fiesta, Focus vehicles, F-150 trucks and more. With over 4,000 items, including Steeda Manufactured Suspension/Chassis components, Induction/Cold Air Intakes and Shifters, Steeda.com is your one-stop for performance parts, accessories, modifications and tuning.

Our performance parts and accessories are built by true performance enthusiasts who are dedicated to the craft they love. Steeda is the culmination of over 30 continuous years of racing history, product innovation and continuous automotive refinement driven by a passion for performance and a love for great design. At Steeda, we share a wealth of our motorsports expertise and ISO 9001:2008 Certified processes in the design, engineering, and manufacturing of our performance parts to bring a completely new level of performance and excitement to every vehicle equipped with our parts. Parts are manufactured at our Steeda Valdosta Georgia complex, home to most modern and up-to-date aftermarket facility in the world.

Speed Matters®

Steeda is an ISO 9001:2008 Certified Global Manufacturer Copyright 1988-2018 Steeda Sales & Services, LLC - All Rights Reserved Worldwide.
Unauthorized duplication or copying is strictly prohibited.
Steeda is an A+ Better Business Bureau certified Business.

Ford, Ford Mustang, Ford F-150, F-150, F150 Raptor, Raptor, Mustang GT, SVT Cobra, Cobra, Ford Lightning, Supercrew, Supercab, Power Stroke, Triton V8, Mach 1 Mustang, Shelby GT 500, GT350, GT350R, Cobra R, Bullitt Mustang, SN95, S197, S550, New Edge, V6 Mustang, Fox Body Mustang, EcoBoost, 5.0 Mustang, Ford, Ford, Ford Fusion, Ford Fusion Sport, Ford Focus, Focus, RS, S, SE, SEL, SES, ST, Duratec, Titanium, Electric, ZX3, ZX4, ZX5, ZXW, SVT, LX, ZTS, ZTW, 2.0L EcoBoost, 2.3L EcoBoost Ford Fiesta, Fiesta, S, SE, ST, Titanium, Duratec, 1.6 EcoBoost, Duratorq, Ti-VCT are registered trademarks of Ford Motor Company. Steeda Sales & Service, LLC has no affiliation with the Ford Motor Company. Throughout our website and catalog these terms are used for identification purposes only.

Top