Steeda Mustang Shifter Base Bushing (2011-2014)

2013 Boss. Installed the Steeda shifter and tranny bushing during my clutch install. Also a SS clutch line. The shifter and shifting is greatly improved. No significant increase in NVH.

This shift bushing provides a great improvement upon the stock shifter of the MT82 manual trans cars. I am using the black (stiffer) bushing, and have noticed no increased NVH. I would recommend this product to anyone looking to improve how their car drives. It will minimize the nibble between 1-2 and help make sure you hit 3rd perfectly when going WOT in 2nd. Don't think about it, add this product to your cart and buy it!

I have a 2011 Mustang and installed mine tonight. I had some difficulty getting the bracket onto the rubber insert, due to its close proximity to the driveshaft. My wife sat in the driver's seat and pulled up or down on the shifter handle, which helped me a lot. I am an aerospace product Engineer, and could tell this was quality material and great design. I used the black/stiff insert, partly because it comes with a split which made installation easier. My test drive was a real wow. Before the change, I often missed the 2-3 shift under hard acceleration. Flawless tonight. I am glad I did this upgrade.

I installed this bushing today with the Steeda shifter base bushing and used the black bushing. I only got to drive it around the block from idle to 30 mph. There is some vibration down at my feet but not enough to be annoying. The improvement was phenomenal. Shifting up and down isn't a struggle like it used to be, The shifter just falls into gear. Now I can feel how much throw is in the stock shifter so guess which Steeda part I will be buying next.

Wow , now my shifter feels like a shifter and not a wet noodle .. Before my shifter was kind of guess a gear , meaning you never know if you hit the gear change ..Now it feels great .. No added cabin noise or vibration that I could tell ... I was going to change the shifter to a high dollar aftermarket shifter but now I see no need to spend that money ..

Money well spent, Installed it in 15 min with common sense and a ratchet, long extenion is a must. Really brings positivity to your shifts, no more Am I in gear? Shifts are smoother, tighter, and come with a reassuring Snick as it slides into gear. It's not a replacement for a custom shifter, but it's the best first step before you can afford to drop $300. again Money well spent and I will continue to shop Steeda for my Pony car.

This bracket is great, no need to replace the stock shifter to correct the terrible mt-82 sloppiness. This bracket has helped tremendously, took about 45 minutes to install with the driveshaft still on the car with the car on jack stands. I recommend this product to everyone and the black insert didnt produce much more nvh that I have noticed yet

Selectable durometer bushing and an easy install. Awesome product!

As soon as you hold this product in your hand, you can tell it's quality! Fitment and install were easy!

I had a performance shop upgrade my entire suspension for my 2011 Mustang GT...along with the suspension components, they highly recommended that the Steeda Mustang Shifter Base Bushing was a must. I agreed and am so glad I had them install it (went with the black bushing). Nothing bu nice, clean shifts compared to the stock part. Now I know why it was so highly recommended!!!

I had trouble shifting my car at high rpm. It seemed like it didn't want to go. I had this bracket installed and now it drives like a champ. Initially it was a little too tight. After about 4 months, it feels perfect. I actually like the stock shifter. It is quiet and doesn't transmit much noise. I did a fluid change with this mod and my car is a joy to shift. Great Product! it was my first mod and I recommend it as a great start to any project.

had put on the triaxe shifter and loved how it in proved the feel and precise shifting but this peace made it even better I used the red insert and didnt notice any sound makes the whole thing seam so much better thanks steeda

If you have already installed the Steeda shifter, you MUST install this piece as well. If you remember how well it improved the feel when you put in the shifter, it will improve it again that much or more. I am very impressed with the feel it gives to the shifting. Install was super easy. It took 10 minutes at the most once the car was in the air. If you are buying the Steeda shifter to install, then get this piece as well. It really is night & day difference.