Steeda Mustang Adjustable Billet Front End Links - Street/Comp (2005-2014)

7 Review(s)
$175.95
$16.00 (9%)
$159.95
Steeda Adjustable Billet Front End Links Street/Comp for S197 Mustang 05-14 make a great upgrade for the stock end links as well as the perfect dual purpose street/open track piece.The adjustment body is constructed from lightweight aerospace grade alumi
Part Number: 555 1053
555-1053
×
If Anderson Composites product is delivered defective or damaged, you must notify Steeda within 24 hours of delivery.

By checking this box, I accept these terms *

Write a Review
×

Description


They're back! Our once discontinued street and race adjustable swaybar end links are back and better than ever!

Steeda's adjustable swaybar end links make a great upgrade for the stock end links as well as the perfect dual purpose street/open track piece.

For street applications these endlinks are as quiet as the factory units. They will not add NVH (noise, vibration, harshness) like rod end units.

For competition use our double adjustable design makes it adjustable on the car and allows to both retain proper swaybar geometry on lowered cars and adjust swaybar preload for fine tuning.

The adjustment body is constructed from lightweight aerospace grade aluminum and is corrosion resistant. End links feature case hardened ball studs that feature significantly increased swing area compared to spherical rod ends. Includes locking hardware for installation.

Read about what Billy Johnson, a professional racecar driver, has to say about the Steeda Adjustable Billet Front End Links in his article on MotoIQ.

Product Benefits
  • As silent as factory units in street use
  • Aerospace grade aluminum center adjusters
  • Double adjustable design for adjustment without removing them from the vehicle
  • Case hardened ball stud
  • More swing area than endlinks with spherical rod ends
  • Proudly made in the USA!
  • Lifetime warranty

CA Residents: Cancer and Reproductive Harm WARNING www.p65warnings.ca.gov.


Hey guys, it's Chris from Steeda, and today we're going to stop body roll on your 2005 to 14 Mustang with a set of Steeda front and rear sway bars. So, what we're going to do is do a product review and then after that an installation video and most importantly a before and after of this 260 000 mile mustang on bone stock suspension and then what it looks like at 240 frames per second with steeda suspension so without further ado let's dive in if you enter 2005 the 2014 s197 mustang and you're looking to reduce body roll everything on this table is what you need to help achieve that goal there's a lot to unpack here but we'll go ahead and start with the front sway bar it's an inch and 3 8 in diameter offers three adjustment points and it's 10 to 85 percent stiffer depending on which adjustment point you pick in comparison to a factory 2011 gt and in this instance on a 2005 dt it'll be even stiffer perhaps my favorite benefit on the steeda front sway bars are the billet ends in comparison to a factory bar where you have those pressed ends it causes a weak point in the bar we've eliminated that all together by including these billet ends and additionally you have those three adjustment points to help dial in that body roll now with the steeda front sway bar on the s197 mustang you can reuse your factory end links that's no problem at all but for this particular instance we actually included our race front end links these are adjustable and allow you to really dial in the upwards or downwards position of the front sway bar depending on whether you've lowered the vehicle or not now moving on the rear bar this is going to complete the setup for this o5 gt so diving in we have these billet rear end links and on top of that the mounts as well to keep everything in place now if you have a 2011 mustang with a 7 8 inch rear bar this is 150 percent stiffer than that bar however if you have the one inch rear bar this is 75 percent stiffer regardless you'd be able to completely dial in the front and rear with this package on your s197 mustang all the necessary hardware is included for installation in addition that you have grease packets as well but speaking of installation let's get started.Hey guys, it's Chris from Steeda, and today we're going to stop body roll on your 2005 to 14 Mustang with a set of Steeda front and rear sway bars. So, what we're going to do is do a product review and then after that an installation video and most importantly a before and after of this 260 000 mile mustang on bone stock suspension and then what it looks like at 240 frames per second with Steeda suspension so without further ado let's dive in if you enter 2005 the 2014 s197 mustang and you're looking to reduce body roll everything on this table is what you need to help achieve that goal there's a lot to unpack here but we'll go ahead and start with the front sway bar it's an inch and 3 8 in diameter offers three adjustment points and it's 10 to 85 percent stiffer depending on which adjustment point you pick in comparison to a factory 2011 gt and in this instance on a 2005 dt it'll be even stiffer perhaps my favorite benefit on the Steeda front sway bars are the billet ends in comparison to a factory bar where you have those pressed ends it causes a weak point in the bar we've eliminated that all together by including these billet ends and additionally you have those three adjustment points to help dial in that body roll now with the Steeda front sway bar on the s197 mustang you can reuse your factory end links that's no problem at all but for this particular instance we actually included our race front end links these are adjustable and allow you to really dial in the upwards or downwards position of the front sway bar depending on whether you've lowered the vehicle or not now moving on the rear bar this is going to complete the setup for this o5 gt so diving in we have these billet rear end links and on top of that the mounts as well to keep everything in place now if you have a 2011 mustang with a 7 8 inch rear bar this is 150 percent stiffer than that bar however if you have the one inch rear bar this is 75 percent stiffer regardless you'd be able to completely dial in the front and rear with this package on your s197 mustang all the necessary hardware is included for installation in addition that you have grease packets as well but speaking of installation let's get started.
View Full Transcript

Fitment & Features

Manufacturer:

Manufacturer: Steeda Autosports
Made in USA: Yes

Installation Information:

Level of Difficulty: Easy
Install Time: About 45 Minutes
Tools Required: Basic Shop Tools
Print Instructions: Installation Instructions

Customer Reviews

Average Customer Ratings

5.0

Excellent replacement
I had the dreaded clunk clunk clunk from the old end links... these cleared that up and I loved being able to adjust the endlinks so that the front sway bar lined up perfectly.
Did you find this helpful? 
from Layton on 6/23/2021
5
S197 upgrade!
After swapping out my front struts I decided to add these beefy front end links. One hell on an upgrade when compared to stock and it's sweet they're adjustable. Highly recommend
Did you find this helpful?  1 of 1 Found Helpful
Verified Buyer   from Boynton Beach on 5/13/2020
5
Awesome product!
Installed on 2006 GT with Steeda's Sway Bar Kit and first thing I noticed were the ease of installation compared to the OEM links. Then the finish on the new links are incredible. Worth the investment.
Did you find this helpful? 
Verified Buyer   from Texas on 3/20/2020
5
Great Product
Really nicely built and easy to work with. Looks awesome and really stands out when looking at the suspension. I installed it with the sway bar kit i purchased so overall as a complete kit the car is handling 110% Better then stock bars and links.
Did you find this helpful?  2 of 2 Found Helpful
Verified Buyer   from Long Island New York. on 8/17/2019
5
Oh My!
Oh My! This is sure purty and it's functional. I purchased these to complement my new Competition front Swaybar (555-1067), because I wanted something that would not flex like steel brackets. Not certain how the brackets that came will the Swaybar would react to hard cornering, so I bought these to be on the safe side. I'll take Steeda on their words for it. Beautiful Billet design and made in the USA. Thanks Steeda, for another awesome product.
Did you find this helpful?  4 of 6 Found Helpful
from Arizona on 8/6/2015
5
Great upgrade for the sway bars
These are double adjustable design for adjustment without removing them from the vehicle! Steeda makes a high quality product, thanks.
Did you find this helpful?  4 of 5 Found Helpful
from Florida on 11/2/2014
5
great replacements
Used these to fix a clunk in the front end of my 06 GT. Really did the trick! Much sturdier and higher quality than the stock ones. These feel very solid, while the stockers felt like they could be snapped by hand.
Did you find this helpful?  10 of 10 Found Helpful
from California on 3/27/2014
5
There are no reviews for this product!

Related Items

123123 - 1
Back to TOP
0 Items