Steeda Autosports

Steeda Mustang Rear Lower Control Arm Spherical Bearings (2024+)

 555 4141
( saved $50.00 )

In Stock - Less than 5 available

Typically ships in 1-3 business days.
Buy Now

No deflection or NVH. From the factory, the S650 Ford Mustang features bushings in the rear control arm that we found to be less than ideal for putting all the 5.0L Coyote's power to the ground. The factory bushings deflect under hard launch or drag race applications conditions causing all sorts of issues that are less than ideal. With their spherical bushing construction, virtually all deflection is eliminated with Steeda's LCA bearing design. The spherical bearings design, unlike most, will not increase NVH (noise, vibration, or harshness) whatsoever so you are able to maintain factory ride quality.

Improved suspension performance. Our Steeda S650 Mustang Rear Lower Control Arm Spherical Bearings eliminates deflection of the factory bushing which is extremely important in any performance application. Deflection in the factory bushings can cause all sorts of negative handling affects. Our spherical rear lower control arm will correct understeer under acceleration of your S650. You will notice increased chassis responsiveness upon installing our spherical bearings. If you drag race your GT, EcoBoost or Dark Horse Mustang our rear lower control arm spherical bearings will play a huge role in eliminating deflection, ensuring your tires hook immediately upon acceleration. Our spherical bearings stop your S650 from building negative toe on launch. In addition to eliminating deflection and compliance of the factory bushings, our spherical bearings will also eliminate the spring rate of the factory bushing which does not allow the suspension to articulate up and down freely.

Install tool included. Unlike other kits on the market, Steeda's includes a billet install / removal tool. The tool is compatible with either hydraulic or ball joint presses making the installation process painless from beginning to end.

Made in USA. Our Steeda Mustang Rear Lower Control Arm Spherical Bearings are manufactured in our state of the art facility in Valdosta, GA from 1018-steel and nickel-plated to prevent corrosion. We use high precision Teflon-lined bearings to ensure smooth operation. This also increases the bearing's life and minimizes the need for it to be replaced.

We recommend these Spherical Bearings for ALL drag racing applications.

Purchase your Steeda S650 Mustang Rear Lower Control Arm Spherical Bearings for your 2024+ Mustang EcoBoost, GT, Dark Horse at Steeda Autosports today!

Product Benefits
  • Pair of rear lower control arm spherical bearings
  • Billet aluminum removal / installation tool included
  • Reduced deflection
  • Reduced wheel hop
  • No NVH increase
  • Eliminates alignment change under power
  • Decreases vehicle reaction times
  • Limited lifetime warranty

warningWARNING: California Residents: Cancer and Reproductive Harm;

Vehicle Trim:
Vehicle Trim:
Made in the USA
Vehicle Trim:
Dark Horse
  • Free Ground Shipping

  • Enthusiast-Driven Customer Service

  • Over 35 Years in Business