If you're looking to make more power with your 1979-1993 5.0L Fox Body Mustang, a set of Long Tube Headers is a must-have. The factory log-style exhaust manifolds on modern vehicles are simply not meant for power, they're designed for cost savings and tight packaging. This limits the amount of air your engine can process, robbing you of horsepower. That's where these Long Tube Headers from Stainless Works shine; featuring 2" primaries that converge into 3.5" collectors, these headers are guaranteed to allow for increased exhaust flow and horsepower potential. They also feature Stainless Works' high flow cats to reduce emissions without restricting performance. Fully TIG welded in the USA from mandrel bent, corrosion resistant 304 stainless steel, these headers are designed for precise fitment and lasting performance under extreme conditions. As with all of Stainless Works' products, these come with a limited lifetime warranty.
Direct Fit Design: Stainless Works offers these headers with different bolt patterns to accommodate a wide variety of heads, K-members, and transmission cross members. They also have a set for Coyote swapped Fox Body's to take the guess work out of your build. All necessary hardware is included, and 02 sensor bungs are pre-welded for your convenience.
SB Dart 210/225: For cylinder heads w/ a 3" wide horizontal in-line bolt pattern across the cylinder ports. Works with TH400 auto transmission, UPR K-member, or AJE K-member/trans-crossmembers. Fits the following heads for the 9.5" tall deck: AFR 205/225, Dart 210/225, Ford Performance Z304, Pro Topline, Canfield and Avenger, World Windsor Jr/Sr. Does not work with QA1 K-member.
SB Trick Flow HP: For cylinder heads w/ 2-o'clock, 8-o'clock bolt pattern. Works with TH400 auto transmission, UPR K-member, or AJE K-member/trans-crossmembers. Fits the following heads for the 9.5"; tall deck: Brodix T1 F STD, Trick Flow HP. Does not work with QA1 K-member.
SB Twisted Wedge: For cylinder heads w/ 2-o'clock, 8-o'clock bolt pattern. Works with TH400 auto transmission, UPR K-member, or AJE K-member/trans-crossmembers. Fits the following heads for the 9.5"; tall deck: Edelbrock Victor Jr, AFR 165/185, Trickflow, Twisted Wedge, SVO/GT40, Brodix St., Dart 170/195. Does not work with QA1 K-member.
SB Twisted Wedge R: For cylinder heads w/ 2-o'clock, 8-o'clock bolt pattern. Works with TH400 auto transmission, UPR K-member, or AJE K-member/trans-crossmembers. Fits the following heads for the 9.5"; tall deck: Brodix T1 F STD X, SVO 351 "N", Trick Flow Twisted Wedge, Victor II. Does not work with QA1 K-member.
Coyote: Fits UPR Fox Body Coyote swap K-member, Flaming River rack & pinion w/ stock steering shaft, Turbo 400 transmission (and smaller), Stiffler crossmember, and OEM starter and alternator. Does not fit QA1 K-member
Product Benefits:
- 1979-1993 Fox Body Mustang 2" Long Tube Headers w/ High Flow Cats
- Increase exhaust flow for more horsepower
- Gives your Fox Body an aggressive sound
- 2" primaries
- 3.5" collectors
- High-flow cats
- Full mandrel bent stainless steel construction
- Will not rust or corrode
- Fitment options: SB Dart 210/225, SB Trick Flow HP, SB Twisted Wedge, SB Twisted Wedge R, and Coyote swaps
- Retains factory 02 sensors
- Includes all necessary hardware
- Made in the USA
- Limited lifetime warranty
Fits: 79-93 Mustang GT. See description for cylinder head fitment options
Note: Most Stainless Works products are built to order with a 4-week lead time
About Stainless Works: Stainless Works is a U.S.-based manufacturer of high-performance stainless steel automotive headers, exhaust systems, and custom components. Founded in 1996 and headquartered in Streetsboro, Ohio, the company designs and manufactures all of its stainless steel products in America using advanced in-house fabrication technologies and skilled craftsmen. Their product line emphasizes durability, corrosion resistance, and performance enhancement for a wide range of vehicles. If you're looking for an exhaust for your Ford vehicle offering uncompromising performance for a lifetime of use, Stainless Works has the solution.
Warning: Not approved for sale in California or states that require a California E.O. #. This part has been designed and is intended for off-road application only. Installation of this part on a vehicle that is driven on public roads may violate U.S. and Canadian laws and regulations. Federal and several state and provincial laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. Steeda Autosports assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer's modifications and/or use of Steeda products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws. Not guaranteed to prevent CEL on all vehicles
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
- Vehicle Fitment:
- 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
