Track days and road race events subject an engine's oiling system to sustained lateral and longitudinal g-forces that stock pickups simply cannot handle reliably. Moroso's road race oil pump pickup tube pairs directly with their Gen 4 Coyote-specific road race oil pans, keeping a consistent oil supply to the pump during continuous high-RPM use on the 2024-2026 Mustang GT and Dark Horse.
Engineered for the Gen 4 Coyote and Aluminator oil pumps. The inlet geometry is designed specifically for the Gen 4 Mustang Coyote and Aluminator oil pump configurations, matching the port location, angle, and sealing surface of the target pump precisely. Note that this pickup is not compatible with Gen 4 F-150 Coyote applications.
Large-diameter tube sustains flow under load. The oversized tube cross-section reduces restriction at the inlet during sustained high-RPM operation, where oil demand peaks and windage interference is greatest. Consistent pump feed at the limits of the engine's speed range translates directly to maintained oil pressure and bearing protection.
A complete, hardware-inclusive kit. The package includes the pickup tube, a main cap bolt, and an 8mm flange head screw, so installation does not require sourcing additional fasteners. Moroso specifies use with Moroso No. 22936 or Ford No. BR3Z-6710-A windage tray and gasket to complete the bottom-end assembly correctly.
Product Benefits
- Road Race-Ready Inlet Design: Matched to Gen 4 Mustang Coyote and Aluminator oil pump geometry for a precise, leak-free fit.
- Large-Diameter Tube: Reduces restriction and sustains oil flow during continuous high-RPM and high-g operation.
- Complete Hardware Kit: Includes pickup tube, main cap bolt, and 8mm flange head screw for a straightforward installation.
- Pan-Specific Fitment: Designed for use with Moroso road race oil pans Nos. 20571, 20572, 20575, and 20576.
- Compatible Windage Tray: Pairs with Moroso No. 22936 or Ford No. BR3Z-6710-A windage tray and gasket.
Note: Fits 2024-2026 Mustang GT and Dark Horse with the 5.0L Gen 4 Coyote or Aluminator engine. Designed for use with Moroso road race oil pans Nos. 20571, 20572, 20575, and 20576. Not compatible with Gen 4 F-150 Coyote applications. Use with Moroso No. 22936 or Ford No. BR3Z-6710-A windage tray and gasket.
About Moroso: Moroso Performance Products has been manufacturing racing engine and chassis components for decades, with a catalog spanning oil pans, valve covers, ignition systems, and fluid management hardware. Moroso parts are developed for competition use and are validated across a wide range of professional and amateur racing applications.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | GT |
| Vehicle Fitment | 2024, 2025, 2026 |
