Keeping oil where it belongs during hard cornering, aggressive braking, and high-RPM pulls requires more than the stock pan can handle. Moroso's 9-inch deep rear-sump oil pan gives your Ford 289 or 302 a 7-quart wet-sump capacity and an integrated anti-slosh baffle that controls oil movement when g-forces try to uncover the pickup. Black powder coat finish adds corrosion resistance without compromising the clean appearance under the hood.
More capacity, better oil control. At 9 inches deep with 7-quart capacity, this pan provides additional oil volume that helps stabilize oil temperature and pressure during extended performance driving. The integrated anti-slosh baffle keeps the pickup submerged when the oil mass shifts, reducing the risk of momentary pressure drops under load.
Clearance engineered for stroked small blocks. The pan clears a 3.40-inch stroke with most steel rods, making it a practical choice for lightly built or stock-stroke 289 and 302 applications across a wide range of Fox-body and classic Ford platforms. Steel construction holds up to the demands of street and strip use without flexing or distorting around the windage.
Moroso Powder Coating finish. Applied in-house at Moroso, the black powder coat resists oil, heat, and underhood chemicals better than paint, and it keeps its appearance through repeated heat cycles.
Product Benefits
- 7-Quart Capacity: More oil volume than stock helps buffer temperature and pressure swings.
- 9-Inch Depth: Deep rear-sump profile maximizes volume within factory chassis constraints.
- Integrated Anti-Slosh Baffle: Holds oil over the pickup under braking, cornering, and acceleration.
- 3.40-Inch Stroke Clearance: Accommodates most steel rod combinations on 289 and 302 builds.
- Steel Construction: Durable wet-sump pan built to handle street and performance use.
- Black Powder Coat: In-house Moroso finish resists oil, heat, and corrosion.
- Wide Fitment: Fits 1979-up Mustang and other Ford rear-sump applications.
Note: Fits 1979-up Mustang and other Ford 289/302 rear-sump applications. Clears 3.40-inch stroke with most steel rods. Compatible with 302 engines using 4-bolt center main caps only. Will NOT clear 302 engines with 4-bolt front and rear main caps.
About Moroso: Moroso Performance Products has supplied racing and performance enthusiasts with high-quality drivetrain, oiling, ignition, and chassis components for decades. Moroso manufactures a wide range of products in-house, including their own powder coating operation, ensuring consistent quality across every part that leaves their facility.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 |
