Factory rubber body mounts on the 1999-2003 Ford Super Duty Crew Cab compress, dry-rot, and crack after years of heat cycling, towing, and weather exposure. As the rubber breaks down, the cab sags and drifts out of alignment with the bed, and the damage spreads: worn mounts feed chassis vibration directly into the radiator, hoses, and cooling stack, accelerating wear on components far beyond the bushings themselves. Mishimoto's silicone body mounts replace the entire eight-bushing set to restore ride height, pull body lines back into alignment, and absorb the NVH that degraded factory rubber lets through.
Silicone that holds its shape for the life of the truck. Each bushing is molded from premium silicone, a material that retains its resilience without hardening, dry-rotting, or developing the dry squeak that plagues aftermarket urethane over time. Both OEM-rubber failure modes and the age-related urethane squeak are eliminated at the source.
Dual-coated steel cups and Dacromet hardware throughout. The steel sleeve carrying every bushing receives two layers of corrosion protection, shutting down the rust-through failure that can turn a routine mount swap into a full body-off repair. Every bolt, nut, and washer in the included hardware kit ships finished in Dacromet, providing corrosion resistance that outlasts standard zinc plating in road-salt and off-road conditions.
Keyed cap anti-rotation design turns a two-person job into one. The cup retainer holds both the upper and lower cups in position while you insert the bolt and torque from above, eliminating the wrench-on-wrench gymnastics that traditionally require a second set of hands underneath the truck.
Shields the cooling system and surrounding components. Worn body mounts transmit chassis vibration into the radiator, hoses, and cooling stack. Silicone absorbs that NVH at the mount, protecting components that factory rubber leaves exposed as it ages.
Product Benefits
- Silicone Construction: Resists cracking, hardening, and the dry squeak associated with aged urethane bushings.
- Complete Hardware Kit: Every bolt, nut, and washer included, finished in Dacromet for long-term corrosion resistance.
- Restores Cab Alignment: Eight bushings return ride height and body-to-bed alignment to factory spec.
- Dual-Coated Steel Cups: Two layers of corrosion protection on every steel sleeve prevent rust-through failure.
- NVH Absorption: Isolates chassis vibration from the radiator, hoses, and cooling stack.
- Keyed Cap Anti-Rotation Design: Cup retainer holds both cups in place for a one-person installation.
- Direct OEM Fit: No drilling, cutting, or modification required for 1999-2003 Super Duty Crew Cab applications.
- Lifetime Warranty: Backed by Mishimoto's Lifetime Warranty for long-term peace of mind.
Note: Fits 1999-2003 Ford F-250/F-350 Super Duty Crew Cab only.
About Mishimoto: Mishimoto develops performance cooling and drivetrain components engineered to outlast factory parts across a wide range of vehicles. The brand backs its product line with a Lifetime Warranty and focuses on direct-fit solutions that require no modification to install.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 1999, 2000, 2001, 2002, 2003 |
