Factory rubber body mounts on the 2008-2016 Ford Super Duty compress, dry-rot, and crack after years of heat cycling, towing, and road-salt exposure. As the rubber breaks down, the cab sags and drifts out of alignment with the bed, and chassis vibration starts feeding directly into the radiator, hoses, and surrounding cooling stack. Mishimoto's silicone body mount set replaces the entire six-bushing array with a material that holds its resilience for the life of the truck, restores ride height, and pulls body lines back into alignment.
Silicone that won't crack, harden, or squeak. Each bushing is molded from premium silicone, a material that does not dry-rot like OEM rubber or develop the dry squeak that aftermarket urethane is notorious for. The bushings absorb noise, vibration, and harshness at the mount point, protecting the cooling stack and surrounding components that worn rubber leaves exposed to chassis vibration.
Dual-coated steel cups with Dacromet hardware. The steel sleeve carrying each bushing receives two layers of corrosion protection, shutting down the rust-through failure that turns a routine mount swap into a full body-off repair. Every bolt, nut, and washer ships in the included hardware kit, finished in Dacromet for long-term corrosion resistance that outlasts standard zinc plating in road-salt and trail conditions.
A one-person installation. A keyed cap anti-rotation design holds both cups in position while you bolt and torque from above, eliminating the wrench-on-wrench coordination that traditionally makes body mount swaps a two-person job. The six bushings are sized and positioned for the OEM mount points with no drilling, cutting, or modification required.
Product Benefits
- Silicone Construction: Retains resilience indefinitely; resists dry-rot, hardening, and the squeaking common with urethane alternatives.
- NVH Reduction: Absorbs chassis vibration at the mount, protecting the radiator, hoses, and cooling stack from accelerated wear.
- Dual-Coated Steel Cups: Two layers of corrosion protection on every steel sleeve prevent rust-through over the long term.
- Dacromet Hardware Kit: All fasteners included and finished for corrosion resistance that outlasts standard zinc plating.
- Restores Cab Alignment: Silicone bushings bring ride height and body-to-bed alignment back to factory spec after rubber failure.
- Keyed Anti-Rotation Design: Captured cup retainer holds position during torquing, making installation manageable solo.
- Direct OEM Fitment: Six bushings sized and positioned for factory mount points on Regular and Extended Cab applications; no modifications needed.
- Mishimoto Lifetime Warranty: Every bushing and component in the kit is backed for the life of the truck.
Note: Fits 2008-2016 Ford F-250 and F-350 Super Duty Regular Cab and Extended Cab only.
About Mishimoto: Mishimoto designs and engineers performance cooling and drivetrain components for a wide range of enthusiast platforms, including Ford trucks and SUVs. Every Mishimoto product is backed by the brand's Lifetime Warranty and developed with direct-fit integration as a core requirement.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
