Hellwig F-250/F-350 4WD Adjustable Sway Bar Single Rear Wheel and Dually - 2" lift REAR (2017-2020)

1 Review(s)
$793.50
$238.05 (30%)
$555.45
Hellwig's Solid, heat treated chromoly, 1-1/8 rear sway bar is a perfect fit for your Lifted 4WD F-250 / F-350. The bar provides more stability for improved handling, comfort and safety, in both everyday driving and in heavy, tow/haul conditions.
Part Number: 213 7845
7845
×
If Anderson Composites product is delivered defective or damaged, you must notify Steeda within 24 hours of delivery.

By checking this box, I accept these terms *

Write a Review

Description


Hellwig's Solid, heat treated chromoly, 1-1/8" rear sway bar is a perfect fit for your Lifted 4WD F-250 / F-350. The bar provides more stability for improved handling, comfort and safety, in both everyday driving and in heavy, tow/haul conditions. The solvent resistant polyurethane bushings increase responsiveness while ensuring long life and quiet operation. Hellwig's design is application specific for your lifted 4WD F-250 / F-350 and the perfect balance of performance and comfort. Hellwig's adjustable sway bars allow for individual adjustment of the lever arms, allowing the stiffness of the sway bar assembly to be modified by adjustments that increase or reduce the length of the lever arms. This adjustment permits the sway bar to be tuned for different different on and off road situations without replacing the entire bar. The stiffer the bar, the more force required to move the left and right wheels relative to each other. The end result is that this increases the amount of force required to make the body roll. For towing heavy loads attaching the end link to the first hole is recommended. For off road where articulation and ride is a priority, attaching the end link to the furthest hole is recommended. For a combination of towing and on /off road, the center hole is recommended. Hellwig sway bars are designed to work with stock exhaust and may not work with some aftermarket exhausts

Product Benefits:

  • Works with 2" rear lift
  • Adjustable body roll so you benefit from better vehicle control tailored to your level of ride comfort.
  • Greatly improved cornering traction for safer driving and cornering capabilities
  • Greatly improved cornering traction for safer driving and cornering capabilities
  • Distributes weight evenly

 

CA Residents: Cancer and Reproductive Harm WARNING www.p65warnings.ca.gov.

Fitment & Features

Manufacturer:

Manufacturer: Hellwig

Vehicle Fitment:

Fits Model Year: 2017, 2018, 2019, 2020

Customer Reviews

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

SD easy upgrade
I have a 2020 Ford Tremor F350 SD. We pull a 5er and a very heavy skid loader, sometimes a pontoon boat or car trailer. The Tremor is a 2 inch lifted truck with 35 in off road tires. But is designed to pull heavy trailers as well as go off road. The truck did not come with a rear sway bar. Probably for off road reasons. But it squats and leans at highway speeds. We added the rear kit from Hellwig. It was an easy install and looks factory. It bolts to the axle and fits great. There were two plates that have nuts welded to them that bolt to the frame. One the hole was not perfectly lined up to the center of the threads in the nut. So I had to spend time with a Dremel tool to open the hole so it would match and I could get the bolt in. Other than that the install was easy. The parts are well painted and have a good finished look to them. There are 3 adjustments for the bar. I am set in the middle one and like it. I would recommend the kit for Tremor owners. If you go hard off roading you can remove the bar easily. The frame brackets could remain and are out of the way so with a few minutes it could be removed.
Did you find this helpful? 
from Wisconsin on 4/3/2021
5
There are no reviews for this product!

Related Items

123123 - 1
Back to TOP
0 Items