Standard sound deadening materials come in sheets that work fine on flat panels but fight you on wheel wells, irregular body contours, and tight corners. Heatshield Products db Skin takes a different approach, delivering a brushable, rollable, or sprayable sound insulation coating that conforms to any shape, sticks to nearly any surface, and cures to a flexible, durable black finish that lasts.
Silica-mica and ceramic technology do the heavy lifting. The water-based formula uses silica-mica and ceramic particles to dampen structural vibrations across a 10-40 kHz range. Applied behind speaker boxes, it can increase speaker output by 1-3 decibels, cleaning up resonance that muddies audio quality.
Versatility that sheet products simply cannot match. db Skin bonds to wood, metal, fiberglass, and many plastic surfaces. Use it on floor pans, wheel wells, fenders, truck beds, fuel tanks, firewall surfaces, and bumper backs, anywhere a rigid mat would lift at the edges or refuse to lay flat. It suits automotive, marine, and industrial applications equally well.
Application is straightforward with minimal cleanup. Apply with a Schutz gun, brush, or roller depending on surface geometry. The water-based formula cleans up with warm water before it cures. Multiple coats build up sound and vibration control to whatever level the application demands. Once air-dried, the coating remains flexible rather than cracking or delaminating under movement.
Rated for real-world heat exposure. db Skin carries a continuous heat rating of 200F (93C) and an intermittent rating of 250F (121F), making it suitable for engine-adjacent panels, floor pans near exhaust routing, and other areas where thermal exposure is a factor.
Product Benefits
- Silica-Mica and Ceramic Formula: Dampens structural vibration across a 10-40 kHz range for measurable noise reduction.
- Speaker Performance Gain: Can improve speaker output by 1-3 decibels when applied to speaker boxes.
- Multi-Surface Adhesion: Bonds to wood, metal, fiberglass, and many plastics without priming in most applications.
- Conforms to Irregular Shapes: Reaches wheel wells, fenders, fuel tanks, and other surfaces where sheet deadeners fail.
- Lightweight Construction: Adds less mass than traditional butyl rubber sheet products.
- Flexible Cured Finish: Remains pliable after curing so it does not crack with panel flex or temperature cycling.
- Continuous Heat Rating of 200F: Rated for sustained exposure up to 200F (93C), intermittent to 250F (121C).
- Easy Cleanup: Water-based formula rinses clean with warm water before curing.
- Made in the USA: Manufactured domestically from quality materials.
About Heatshield Products: Heatshield Products designs and manufactures thermal and acoustic management solutions for automotive, marine, and industrial applications. Every product in the lineup is produced in the USA and developed to address real-world heat and noise challenges across a wide range of platforms and uses.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
