Radiant heat from exhaust pipes raises underhood temperatures, bakes nearby wiring and hoses, and bleeds into the cabin. Heatshield Products' Armor Pipe Kit puts a stop to that by wrapping 2 to 2-1/4 inch pipes across a full 4 feet of coverage, cutting radiant heat output by up to 70 percent without the frustrating coiling process of traditional exhaust wrap.
No wrap, no hassle. The kit arrives pre-cut to length and width with rivets already installed. Bend the shield around the pipe, secure it with the included Inconel HP Tie Wire, and the job is done in minutes, without removing the exhaust from the vehicle.
Built-in breather gap protects the pipe and the shield. Unlike solid wraps that trap moisture against metal, Heatshield Armor maintains an air gap between the insulation and the pipe surface. That gap allows the pipe to breathe, prevents rust acceleration, and keeps the shield warranty-friendly on factory exhaust systems.
Rated for serious heat. BioCool insulation handles continuous temperatures up to 1800°F and intermittent spikes to 2200°F, covering the full thermal range of performance and stock exhaust systems alike.
Paintable to match any build. The outer surface accepts any engine or exhaust paint, so the finished installation can match the engine bay or chassis color rather than standing out as an afterthought. Stainless-steel hardware with Inconel wire holds everything in place long-term without corroding.
Product Benefits
- 70% Radiant Heat Reduction: Lowers heat output from exhaust pipes to protect nearby components and the cabin.
- Fits 2 to 2-1/4 Inch Pipe: Pre-sized for a correct fit on common exhaust pipe diameters, covering 4 feet of pipe.
- Fast Installation: Pre-cut panels and pre-installed rivets mean no measuring, no coiling, and no pipe removal required.
- 1800°F Continuous Rating: BioCool insulation withstands sustained high heat from performance and stock exhaust systems.
- 2200°F Intermittent Rating: Handles peak temperature spikes without degrading.
- Breather Gap Design: Keeps air between the insulation and pipe, preventing moisture trapping and preserving pipe condition.
- Trimmable to Custom Length: Cuts cleanly with heavy-duty scissors or a utility knife, no tin snips required.
- Paintable Finish: Accepts any engine or exhaust paint for a clean, integrated appearance.
- Stainless and Inconel Hardware: Corrosion-resistant fasteners and tie wire hold the shield securely through heat cycles.
- Made in the USA: Manufactured domestically by Heatshield Products.
About Heatshield Products: Heatshield Products designs and manufactures thermal management solutions for automotive, motorsport, and industrial applications. Every product in the Heatshield Armor line is made in the USA and engineered to reduce radiant heat transfer without compromising the components it covers.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
