The new X2347 Crate Engine features Ford Racing's newest cylinder head, the "X2". The most popular crate engine size just got better and easier thanks to the Engineers at Ford Racing. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam, cylinder head, intake manifold and carburetor combination that runs on pump gas. It takes the guesswork and installation issues out of the way with a complete intake and distributor package that has been developed and tested by Ford Racing Engineers. To dress out the X2347D, The Ford Racing Engineers spec'd parts from the best in the aftermarket like Holley, Edelbrock and MSD.
The camshaft is what really makes the X2347D the perfect street cruiser, the intake and exhaust lobes have fast opening ramps to keep port velocity high. The engine idles happily at 800 RPM and pulls 19 inches of vacuum. That translates into snappy acceleration at low engine speeds and power that pulls strong to 6,000 RPM. New Ford Racing aluminum X2 heads top off the engine. Completing the street tuned package is an Edelbrock Performer RPM Air-Gap intake and Holley Street Avenger carburetor. A MSD Billet Distributor and "Ford Racing" spark plug wires finish the package.
360 Horsepower/400 lb.-ft. of Torque
- Engine type: 302 based small block Ford
- Displacement (cu in): 347
- Bore x stroke (in): 4.030" bore x 3.400" stroke
- Block: Boss 302 8.2 deck - M-6010-BOSS302
- Crankshaft: SCAT Forged Steel
- Connecting rods: SCAT forged steel I-beam connecting rods
- Pistons: Forged Mahle w/ floating wrist pins
- Cylinder Heads: Ford Racing aluminum, 64 cc chamber - M-6049-X2
- Valve size (in): 1.94 intake 1.54 exhaust
- Compression ratio: 9.6:1 Edelbrock Performer RPM Air Gap Manifold (PN 7521)
- Holley Street Avenger 570 CFM Carburetor with vacuum secondaries, 4-corner idle and Electric Choke (PN 83570) Rocker arms:
- Roller Rockers 1.6:1 ratio
- Valve covers: "Ford Racing" black satin aluminum M-6582-A301R
- MSD billet distributor (MSD Part No. 8598)
- "Ford Racing" 9MM Black Spark Plug Wires - M-12259-M301
- Camshaft type: Hydraulic Roller. Comp Cams .533" lift intake and exhaust 206-degree duration intake and exhaust @ .050 lift
- Double roller timing chain set - M-6268-A302
- Vibration Damper: Ford Racing SFI Approved
- Oil pan: high performance front sump 7 quart capacity and windage tray / scraper
- Recommended fuel: Unleaded premium
- Maximum recommended rpm: 6,000 RPM
- Balanced: Internal. Use neutral balance flywheel
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Installation Difficulty | Tech Recommended |
| Tools Required | Basic Shop Tools |
| Estimated Install Time | (approx.) 30 Minutes |
| Vehicle Fitment | 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 |
| Inventory Status Override | MFR EST Ship Date 08-15-2022 |
