Stock rotors on a work-and-tow platform like the 2011 F-150 3.5L EcoBoost 2WD face heat cycles, heavy loads, and stop-and-go abuse that accelerate pad glazing and rotor ridge formation. EBC's USR7536 Ultimax Slotted Rotors address that wear pattern directly, keeping brake performance consistent from the first stop to the last.
Precision slotting that works quietly. The narrower multi-slot design and progressive slot angle sweep gas, water, dirt, and debris off the pad face without the noise penalty that plagues many sport rotors. These rotors run silent on the street while still delivering the surface-cleaning benefits slotting provides.
Flat, parallel pad wear over the full service life. EBC's position on slotted rotors is straightforward: the primary advantage is promoting even pad contact. Drilled-only rotors allow ridges to develop across the pad surface, which reduces effective contact area and introduces inconsistency as pads and rotors wear together. The USR slot geometry prevents those ridges, keeping friction consistent throughout the life of both components.
R90-approved G3000 grey iron construction. Every USR rotor starts from a premium G3000 grey iron blank that meets R90 approval standards. EBC manufactures these rotors in its own UK and USA facilities, with batch metallurgy checks, dimensional inspection, X-ray analysis, and balance verification on incoming components. The result is a rotor blank that meets exacting tolerances before any machining begins.
Front fitment, direct replacement. The USR7536 fits the front axle of the 2011 F-150 3.5L EcoBoost 2WD on the 7-lug hub pattern, dropping in as a direct OEM replacement with no modifications required. Pair with a matching EBC high-friction pad set to realize the full benefit of the slotted surface.
Product Benefits
- USR Slotted Design: Multi-slot pattern at a progressive angle removes gas, water, and debris while running quietly on the street.
- Parallel Pad Wear: Slot geometry prevents ridge formation across pad and rotor surfaces, keeping braking consistent over the full wear life.
- R90-Approved G3000 Grey Iron: Premium blank material meets international rotor approval standards before machining.
- UK and USA Manufactured: EBC produces 92% of what it sells in its own plants, with strict quality control on all sourced components.
- Rigorous Quality Inspection: Every production batch undergoes metallurgy, dimensional, X-ray, balance, and accuracy checks.
- Direct-Fit Front Replacement: Sized for the 2011 F-150 3.5L EcoBoost 2WD 7-lug front hub, no modification needed.
- Best Used with Matching Pads: Performance and longevity increase significantly when paired with a compatible EBC high-friction brake pad set.
About EBC Brakes: EBC Brakes manufactures the majority of its product line in its own facilities in the United Kingdom and the United States, holding BS5750 and ISO accreditations across its supply chain. The brand covers everything from street replacement pads and rotors to full race-compound brake kits, with in-house production giving it direct control over material quality and dimensional accuracy at every stage.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | XL, XLT, Lariat |
| Vehicle Fitment | 2010, 2012, 2013, 2014 |
| FMSI Pad No. | D1414 |
