Stock rotors on the 2000-2004 F-150 4.2L 2WD were specced for average use, not the kind of repeated hard stops that heat up rotors and glaze pads. EBC's USR Slotted Rotors give the front axle a genuine upgrade: precision-machined slots that evacuate gas, water, dirt, and debris while keeping pad wear flat and parallel across the full service life.
Slots that do real work. The narrower multi-slot design and the progressive angle at which the slots are machined produce a quiet-running sport rotor. Unlike drilled-only rotors, slotted surfaces prevent the ridges that develop on pads and rotors over time, ridges that cause inconsistent brake feel and accelerated wear. Consistent contact geometry means consistent stopping power from the first press to the last.
Premium iron from the start. Every USR rotor begins as an R90-approved G3000 grey iron blank, precision machined in EBC's own facilities in the UK or the USA. The G3000 spec targets the density and hardness needed for repeatable fade resistance under fast street conditions, and R90 approval confirms the blank meets European safety standards before a single slot is cut.
Quality control at every step. EBC manufactures 92 percent of everything it sells in its own plants. Components sourced externally pass through batch metallurgy checks, X-ray inspection, balance testing, and dimensional verification before they enter production. ISO and BS5750 accreditations govern the process end to end.
Product Benefits
- Direct Front Fitment: Designed specifically for the 2000-2004 F-150 4.2L 2WD with 4-wheel ABS and 7-lug configuration.
- Progressive Slot Geometry: Slots are machined at a progressive angle to evacuate gas, water, dirt, and debris without generating rotor noise.
- Parallel Pad Wear: Slot design promotes flat, even pad contact, preventing the ridges that degrade braking consistency on drilled-only rotors.
- R90-Approved G3000 Grey Iron: Premium blank material meets European rotor safety certification standards.
- UK and USA Machined: Precision machined in EBC's own manufacturing plants, not outsourced to unverified facilities.
- ISO and BS5750 Accredited Production: Independent accreditation governs every stage of manufacturing and incoming component inspection.
- Silent Street Operation: The USR range targets fast street use with a quiet-running profile suitable for daily driving.
About EBC Brakes: EBC Brakes is one of the largest dedicated brake manufacturers in the world, producing pads, rotors, and brake kits in its own UK and USA facilities. The company controls 92 percent of its manufacturing in-house and subjects all externally sourced components to rigorous metallurgy, dimensional, and X-ray inspection before use. EBC's USR Ultimax Slotted Rotor range represents its premium street-performance rotor line, built on R90-approved blanks and validated through extensive real-world testing.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003 |
| FMSI Pad No. | D702 |
