Stock rotors on the 2000-2001 F-150 4.2L 2WD were sized for average use, not spirited driving or repeated hard stops. EBC's USR7131 Ultimax Slotted Rotors give the rear axle a precision-machined upgrade that degasses, cleans, and maintains parallel pad wear without the noise penalty that comes with aggressive drilled designs.
R90-approved G3000 grey iron construction. Every USR rotor blank starts life as a high-quality G3000 grey iron casting that meets R90 approval standards. That material baseline gives the rotor consistent thermal properties and dimensional stability under repeated heat cycles.
Progressive-angle slot design keeps things quiet. The narrower multi-slot pattern is machined at a progressive angle across the face, which lets the rotor expel gas, dirt, water, and debris without generating the rotor noise often associated with slotted performance rotors. The result is a sport rotor that drives like a street rotor on a daily commute.
Flat, parallel pad wear is the real performance story. Drilled-only rotors allow ridges to develop on pad faces over time, reducing contact area and creating inconsistent bite. The USR slot geometry promotes even, parallel pad wear across the full contact surface, keeping braking feel consistent from the first mile to the last mile of pad life.
Manufactured in the UK or USA under strict quality controls. EBC manufactures 92 percent of everything it sells in its own facilities. USR rotors are precision machined in the UK or USA from those R90-approved blanks and undergo batch metallurgy checks, X-ray inspection, balance verification, and dimensional validation before leaving the factory.
Product Benefits
- Direct Rear Fitment: Sized specifically for the 2000-2001 F-150 4.2L 2WD 7-lug configuration with Wheel ABS compatibility.
- R90-Approved Blanks: G3000 grey iron rotor blanks meet European R90 standards for quality and consistency.
- Progressive Slot Angle: Channels gas, moisture, and debris away from the pad face while running quietly on the street.
- Parallel Pad Wear: Slot geometry prevents pad ridging, keeping braking feel consistent throughout rotor and pad life.
- UK or USA Manufactured: Precision machined in EBC's own facilities, not outsourced to unknown suppliers.
- Rigorous Quality Control: Every batch receives metallurgy checks, X-ray inspection, balance testing, and dimensional verification.
- Pairs with EBC Pads: Performance gains increase when matched with a compatible EBC high-friction brake pad set.
About EBC Brakes: EBC Brakes is one of the largest dedicated brake manufacturers in the world, producing rotors, pads, and brake hardware across its own facilities in the United Kingdom and the United States. The company holds BS5750 and ISO accreditations and applies rigorous incoming quality checks to every component it sources, ensuring that every product leaving its plants meets the same standard regardless of origin.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, XL |
| Vehicle Fitment | 2000 |
| FMSI Pad No. | D702 |
