EBC's Ultimax2 front pads replace those factory units with an ECE R90-approved compound that matches OEM stopping power, cuts disc wear significantly, and arrives ready to bed in fast.
Fast bed-in from the first stop. EBC applies its proprietary Brake-In coating to every Ultimax2 pad, which accelerates the transfer film process so the pads reach full friction output quickly without the extended burnishing cycle that bare pads require.
Quieter braking with a progressive feel. Shimmed, chamfered, and slotted construction addresses the three most common sources of brake noise: resonance, edge contact, and uneven pad loading. The result is smooth, progressive pedal feel on cold or hot rotors, with none of the squeal common to hard metallic compounds.
Rotor life extends well beyond a typical pad cycle. EBC's Ultimax2 compound reduces disc wear by up to 50 percent compared to abrasive semi-metallic pads. Where many drivers replace rotors at every pad change, a single rotor can outlast two full sets of Ultimax2 pads, delivering meaningful long-term savings without compromising stopping distance.
Eliminates and compensates for brake judder. The Ultimax2 compound is formulated to correct mild rotor judder after approximately 300 to 400 miles of normal use, smoothing out the pedal pulsation that worn or heat-stressed rotors can produce.
Nucap NRS hook retention. Backplates incorporate Nucap NRS mechanical hooks that anchor the friction material to the plate, eliminating any risk of pad debond over the life of the compound.
Product Benefits
- ECE R90 Approved: Certified as a direct OEM equivalent for public highway use.
- Brake-In Coating: Accelerates pad bed-in so full friction is available sooner.
- Shimmed, Chamfered, and Slotted: Reduces noise, vibration, and uneven pad contact.
- Up to 50% Less Rotor Wear: Gentler compound extends disc life well beyond a single pad set.
- Judder Compensation: Corrects mild brake judder after 300 to 400 miles of use.
- Nucap NRS Retention Hooks: Mechanically bonds friction material to the backplate to prevent debond.
- Direct OEM Fitment: Drops in without modifications to the 2005-2010 Mustang V6 4.0L front calipers.
- Low Dust Output: Comparable to factory pads, keeping wheels cleaner between washes.
About EBC Brakes: EBC Brakes manufactures a full range of brake pads, rotors, and brake line kits covering thousands of vehicle applications worldwide. Their product lines span daily-driver replacements through track-focused compounds, each developed and tested to meet or exceed applicable brake safety standards.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, GT |
| Vehicle Fitment | 2005, 2006, 2007, 2008, 2009, 2010 |
| FMSI Pad No. | D1081 |
