Stock rotors on the 2000-2004 Focus 2.0 were built to meet the demands of a commuter, not a performance standard. EBC's RK895 front rotors replace them with G3000 spec cast iron units machined to tighter tolerances, 100% runout-inspected, and finished in EBC's Gen 3 silver grey Geomet-style coating for lasting corrosion resistance.
Gen 3 corrosion-resistant coating sets a new standard. EBC transitioned to its silver grey Geomet-style surface treatment in early 2023. The coating is applied directly at the casting plant immediately after machining and washing, leaving zero window for surface oxidation to form on bare iron. The result is far greater corrosion resistance than the previous thermic black etch finish, and the silver hue closely matches OEM rotor colors so the car looks consistent if only one axle is being replaced.
G3000 cast iron construction with 100% runout inspection. Every rotor leaves the factory only after passing a dedicated runout inspection, regardless of how precisely the CNC machining was executed. Excessive runout causes disc thickness variation, which leads to pedal pulsation and vibration over time. EBC eliminates that risk at the source, not after the part is already on your car.
European-sourced castings, UK and USA machining. Over 80% of EBC's rotor castings originate in Europe, and all sport rotor machining is performed in either the United Kingdom or the United States. That production chain gives EBC direct control over material quality and dimensional accuracy at every stage.
Product Benefits
- Direct Front Fitment: Engineered specifically for the 2000-2004 Ford Focus 2.0, front axle.
- G3000 Cast Iron: OE-grade iron specification for consistent thermal performance and long service life.
- Gen 3 Silver Grey Coating: Applied at the casting plant for maximum adhesion and corrosion protection from day one.
- 100% Runout Inspected: Every individual rotor passes a dedicated runout check before leaving the facility.
- Color-Matched Appearance: Silver finish complements factory rotor hubs, keeping the car looking uniform when replacing one axle at a time.
- Controlled Production Chain: European castings with UK or USA machining ensure tight dimensional tolerances throughout.
About EBC Brakes: EBC Brakes is a specialist brake component manufacturer with production facilities in the United Kingdom and the United States. The brand covers a wide range of vehicles from daily drivers to track-day builds, with an emphasis on consistent material quality, in-house testing, and full traceability from raw casting through final inspection.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | LX, SE, SVT, ZTS, ZTW, ZX3, ZX5 |
| Vehicle Fitment | 2000, 2001, 2002, 2003, 2004 |
| FMSI Pad No. | D816 |
