Stock rotors on the 2015-2023 Mustang PP 5.0 handle street miles, but repeated hard stops accelerate surface corrosion and rotor wear faster than the hardware deserves. EBC's RK7694 front rotors replace the factory units with G3000 spec cast iron precision, a Gen 3 silver grey Geomet-style coating, and 100% runout inspection before the rotor ever leaves the facility.
Gen 3 silver grey coating raises the corrosion bar. EBC switched to its latest Geomet-style silver grey surface coating in early 2023, applying it as part of the casting process immediately after machining and washing. That timing matters: bare iron begins corroding within minutes of being washed, so coating at the source eliminates the window for surface rust to take hold. The result is far higher corrosion resistance than the former black etch paint, and a silver hub appearance after bedding that closely matches OEM rotor colors on the opposite axle.
G3000 spec cast iron, machined in the UK or USA. EBC sources over 80% of its rotor castings from European facilities and completes all sport rotor machining in either the UK or the United States. The G3000 iron specification sets the foundation for consistent friction surfaces, predictable torque, and rotor geometry that stays true under repeated thermal cycles.
Every rotor passes individual runout inspection. No rotor ships without passing EBC's dedicated runout inspection process. Precise runout tolerances prevent the disc thickness variation that causes pedal pulsation and vibration after the first few thousand miles, a failure mode that often gets misdiagnosed as a brake pad or caliper issue.
Product Benefits
- Direct Front Fitment: Sized and drilled for the 2015-2023 Mustang PP 5.0 front axle, no modification needed.
- Gen 3 Geomet-Style Coating: Silver grey surface applied at the casting plant delivers superior corrosion resistance versus black etch paint.
- G3000 Cast Iron: Industry-standard iron grade ensures consistent friction characteristics and long service life.
- European and USA Machining: Over 80% of castings sourced in Europe; all sport rotor machining completed in the UK or USA.
- 100% Runout Inspection: Every individual rotor is checked before shipment to guarantee proper disc alignment and eliminate pulsation risk.
- OEM-Compatible Appearance: Silver hub finish after bedding matches factory rotor color, keeping the front and rear axle appearance consistent when only one axle is replaced.
- Environmentally Controlled Coating Process: Coating applied in an air-quality-controlled facility as part of production, reducing environmental impact versus post-machining painting.
About EBC Brakes: EBC Brakes is a UK-founded brake specialist with decades of experience supplying friction and rotor products for street, track, and competition use. The brand maintains in-house machining facilities in the UK and works with European casting partners to control quality from raw iron to finished rotor.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | EcoBoost Premium, EcoBoost, V6 |
| Vehicle Fitment | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 |
| FMSI Pad No. | D1792 |
