Stock rotors on the 2000-2004 F-150 4.2L 2WD were engineered to a price point, not a performance standard. EBC's RK7132 front rotors replace them with G3000 spec cast iron units that meet OE dimensional tolerances and add a Gen 3 Geomet-style silver grey coating built to outlast the black etch paint used on older aftermarket rotors.
G3000 cast iron construction. G3000 is the same grade specification used by original equipment brake suppliers. The material provides consistent friction surface hardness, predictable wear characteristics, and the thermal stability needed to handle repeated stops under load. Every casting is runout-inspected after machining, so each rotor ships with verified disc alignment before it ever reaches your truck.
Gen 3 silver grey Geomet-style coating. EBC transitioned to this corrosion-resistant surface finish in early 2023. The coating is applied at the casting facility immediately after machining and washing, which prevents the surface oxidation that forms within minutes on bare iron. The silver grey finish stays visible on the hat and hub after bedding in, so the rotor appearance stays consistent across axles if only one end of the truck is upgraded.
Precision machining with traceable sourcing. Over 80 percent of EBC rotor castings originate from European foundries, and all machining for sport rotors is completed in either the United Kingdom or the United States. The production process is handled in an air quality-controlled environment, keeping the coating application free from contamination.
4-Wheel ABS compatible. The RK7132 is specified for 2000-2004 F-150 4.2L 2WD trucks equipped with 4-wheel ABS and a 7-lug hub pattern. The rotor mates to the factory hub without modification.
Product Benefits
- G3000 Cast Iron: OE-grade material for consistent friction, wear, and thermal performance.
- Gen 3 Geomet Coating: Highly corrosion-resistant silver grey finish applied at the foundry immediately after machining.
- 100% Runout Inspected: Every rotor passes dimensional verification before leaving the production facility.
- European Castings: Over 80 percent of castings sourced from European foundries for consistent metallurgical quality.
- UK/USA Machined: All sport rotor machining completed in the United Kingdom or United States.
- Direct Fit: Engineered for 2000-2004 F-150 4.2L 2WD with 4-wheel ABS and 7-lug hubs, no modification required.
- Matched Appearance: Silver hub finish after bedding matches OE rotor appearance when upgrading a single axle.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake kits for automotive and motorsport applications. With foundry partnerships across Europe and machining operations in the UK and USA, EBC controls the production process from casting to final inspection, maintaining G3000 spec standards across its rotor lineup.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003 |
| FMSI Pad No. | D702 |
