Stock rotors on the 2002-2004 Focus 2.0 SVT were built to handle your daily commute, not a performance standard. EBC's RK7129 rear rotors replace them with G3000 spec cast iron units that are runout-inspected individually, machined in the UK or USA, and finished in EBC's Gen 3 silver-grey Geomet-style corrosion-resistant coating.
G3000 cast iron construction. G3000 spec is the same grade of iron used in original equipment brake rotors from major manufacturers. It delivers consistent friction characteristics, resists heat cracking, and holds dimensional stability under repeated hard stops better than lower-grade import castings.
Gen 3 silver-grey coating sets a new standard for corrosion resistance. EBC's updated surface finish replaces the older thermic black etch paint with a silver-grey Geomet-style coating applied immediately after machining and washing at the casting plant. Applying the coating before surface oxidation can set in results in far better long-term corrosion resistance. The silver finish also closely matches factory rotor appearance, so mixed-axle upgrades keep the car looking consistent front to rear.
100% runout inspection, no exceptions. Every rotor passes through a dedicated runout inspection machine before it ships. Tight runout tolerances prevent disc thickness variation, which is the root cause of brake pedal pulsation that typically develops between 3,000 and 4,000 miles on lesser rotors.
European castings, UK and USA machining. Over 80% of EBC's rotor castings originate in European foundries, and all machining for sport rotors is completed in either the UK or the USA. That production chain keeps dimensional tolerances and metallurgical consistency well above what most offshore-only suppliers can achieve.
Product Benefits
- Direct Rear Fitment: Engineered specifically for the 2002-2004 Ford Focus 2.0 SVT rear axle.
- G3000 Cast Iron: OE-grade iron spec for consistent friction, heat resistance, and long service life.
- Gen 3 Corrosion Coating: Silver-grey Geomet-style finish offers significantly higher rust resistance than black etch paint.
- Individual Runout Inspection: Every rotor is machine-checked before shipment to guarantee proper alignment and eliminate pedal pulsation.
- UK and USA Machined: Sport rotor machining completed in EBC's UK or US facilities for tight dimensional tolerances.
- Matched Appearance: Silver finish closely mirrors factory rotor color, keeping the car's appearance consistent if only one axle is upgraded.
- Environmentally Controlled Coating Process: Coating applied in the casting plant's air-quality-controlled environment immediately after washing, preventing pre-coat oxidation.
About EBC Brakes: EBC Brakes is a specialist brake component manufacturer with production and engineering facilities in the UK and USA. The company produces a full range of rotors, pads, and brake lines for street, track, and off-road applications, with a quality control process that includes 100% runout inspection on every disc rotor before it leaves the facility.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | SVT |
| Vehicle Fitment | 2002, 2003, 2004 |
| FMSI Pad No. | D886 |
