Stock rear rotors on the 1987-1993 Mustang 5.0 were designed for the average driver, not a performance standard. EBC's RK7022 Premium Rotors replace them with G3000 spec cast iron units that are 100% runout-inspected before leaving the facility, so vibration-causing disc thickness variation never reaches your driveway.
Gen 3 Silver Grey Geomet coating changes the game. EBC switched to a highly corrosion-resistant silver grey surface coating that far outperforms the previous black etch paint. Applied immediately after machining and washing inside the casting plant itself, the coating seals the iron before surface oxidation can set in. The silver finish also closely matches factory rotor colors, keeping the appearance consistent if only one axle has been upgraded.
Casting quality backs up every claim. Over 80% of EBC rotor castings originate in Europe, with 100% of sport rotor machining completed in either the UK or the USA. G3000 spec cast iron defines the material standard, and every individual rotor clears a dedicated runout inspection machine before shipment. No exceptions.
A direct replacement that fits properly from the start. These rear rotors bolt into the 1987-1993 Mustang 5.0 chassis without modification. If runout appears after installation, EBC's own data shows it traces back to chassis alignment issues present on roughly one in seven vehicles, not to rotor manufacturing variance.
Product Benefits
- G3000 Cast Iron: Highest-grade iron specification for consistent friction surface integrity.
- Gen 3 Geomet Coating: Silver grey finish delivers superior corrosion resistance over former black etch paint.
- Applied at the Source: Coating goes on immediately after machining, preventing pre-shipment surface oxidation.
- 100% Runout Inspected: Every rotor passes a dedicated runout check before it leaves production.
- European and US Sourced: Over 80% of castings produced in Europe; sport rotor machining done in the UK or USA.
- OE-Matching Appearance: Silver finish blends with factory rotor colors when only one axle is replaced.
- Direct Rear Fitment: Bolt-on replacement for 1987-1993 Mustang 5.0, no modification required.
About EBC Brakes: EBC Brakes is a specialist brake component manufacturer with production facilities in the UK and the USA. The company produces a full range of brake pads, rotors, and brake lines across automotive, motorcycle, and powersports applications, with an emphasis on material quality, in-house testing, and traceable manufacturing standards.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | SVT Cobra R, SVT Cobra |
| Vehicle Fitment | 1993 |
| FMSI Pad No. | D347 |
