Stock rotors on the non-turbo Fiesta 1.6L are adequate for daily driving, but corrosion, runout, and uneven wear accelerate the moment conditions get harder than a gentle commute. EBC's RK1676 front rotors replace the factory units with G3000 spec cast iron discs that are 100% runout-inspected before they leave the factory, so you bolt on a rotor that is already confirmed straight.
Gen 3 silver-grey Geomet coating. EBC's latest-generation surface treatment delivers significantly higher corrosion resistance than the former black etch paint. Applied immediately after machining and washing at the casting plant, the coating bonds before bare iron has any chance to surface-oxidize. The silver-grey finish also closely matches OEM rotor appearance, so the front axle will not look mismatched if the rears remain stock.
G3000 cast iron construction with full runout inspection. EBC machines all sport rotors in either the UK or the USA, using G3000 spec iron that meets OE-grade material properties. Every single disc passes a runout inspection before shipment. Excess runout is one of the primary causes of disc thickness variation and the pedal pulsation that follows after 3,000 to 4,000 miles of driving, so this step is not optional on EBC's production floor.
Direct-fit replacement for non-ST, non-turbo applications. These rotors are specific to the standard 1.6L Fiesta from 2010 through 2019 without the ST performance package or factory turbo. They bolt to the factory hubs and calipers without modification, making them a straightforward weekend swap.
Product Benefits
- G3000 Cast Iron: OE-grade iron spec for consistent thermal performance and long service life.
- Gen 3 Geomet Coating: High-corrosion-resistance silver-grey finish applied at the casting plant for maximum adhesion.
- 100% Runout Inspected: Every rotor is individually checked before shipping to confirm true disc alignment.
- UK/USA Machined: Sport rotor machining completed in either the UK or the USA for tight dimensional tolerances.
- Direct Bolt-On Fit: Engineered specifically for 2010-2019 Fiesta 1.6L non-ST, non-turbo front axle.
- OEM-Match Appearance: Silver-grey hat finish closely mirrors factory rotor color after bedding.
- No Modification Required: Installs with standard hand tools on the factory hub and caliper setup.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer with production facilities in the UK and the USA. The company engineers a full range of brake rotors, pads, and kits for passenger, performance, and motorsport applications, with over 80% of rotor castings sourced from European foundries and all sport rotor machining completed in-house under controlled quality processes.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | S, SE, Titanium |
| Vehicle Fitment | 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 |
| FMSI Pad No. | D1454 |
