Stock brake rotors on the Bronco Sport 1.5L handle everyday driving fine, but add a load, a trailer, or a mountain descent and heat buildup becomes the enemy of consistent stopping power. EBC's GD7870 GD Sport Rotors address that directly with wide-aperture slots and dimple drilling that actively manage heat and debris at the rotor-pad interface.
Wide-aperture slots that do real work. The slot geometry draws cooler air under the pad contact surface and channels out dirt, mud, water, and dust from the braking zone. Pad temperatures during heavy braking can exceed 1,000 degrees Fahrenheit at the contact point, and reducing that heat means less fade and more consistent pedal feel when it counts.
Dimple drilling without the crack risk. EBC pioneered the dimple-drilled rotor in the 1990s as an alternative to through-drilling. Through holes have been shown to promote rotor cracking under thermal stress; dimple drilling delivers the pad degassing benefit without compromising the structural integrity of the rotor.
Third-generation corrosion protection. GD Series rotors ship with a silver corrosion-resistant finish that extends service life and keeps the rotors presentable behind open-spoke wheels. Blanks carry R90 approval and are 100% machined in the United Kingdom, with the majority cast in EU foundries operating under ISO and BS5750 quality standards. Every rotor goes through a full runout, metallurgy, and dimensional check before leaving the facility, followed by balance and runout inspection prior to release.
Front fitment, direct replacement. The GD7870 fits the front axle of 2021 and later Bronco Sport 1.5L models as a direct bolt-on with no modifications to the hub or caliper bracket.
Product Benefits
- Wide-Aperture Slots: Channel heat, water, mud, and dust away from the pad-rotor interface for cooler, more consistent braking.
- Dimple-Drilled Design: Provides pad degassing without the through-hole crack risk, a technique EBC developed in the 1990s.
- R90-Approved Blanks: 100% machined in the UK from certified blanks, with the majority cast in ISO-accredited EU foundries.
- Silver Corrosion-Resistant Finish: Third-generation coating extends rotor life and maintains appearance.
- 100% Quality Inspection: Every rotor receives runout, metallurgy, and dimensional checks plus balance verification before shipment.
- Direct-Fit Front Replacement: Bolts onto 2021+ Bronco Sport 1.5L front hubs without bracket modifications.
- Even Pad Wear: Slot pattern promotes uniform pad contact across the full sweep area.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake lines for street, tow, and track applications. Rotor production runs through ISO and TUV approved facilities, and every finished unit passes a full dimensional, metallurgical, and runout inspection before release to the market.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | S, SE Hybrid, SE, SEL Hybrid, SEL, Titanium Hybrid, Titanium, Active, Base, Platinum Hybrid, Platinum, Plug-In Hybrid, ST-Line Elite Hybrid, ST-Line Elite, ST-Line Hybrid, ST-Line Select Hybrid, ST-Line Select, ST-Line |
| Vehicle Fitment | 2020, 2021, 2022, 2023 |
| FMSI Pad No. | D2300 |
