Stock rotors on the 2015-2023 Mustang EcoBoost handle everyday commuting without complaint, but push the brakes hard through repeated stops and heat builds fast, pads glaze, and fade sets in. The EBC GD7692 GD Sport rotors address that directly with dimple-drilled and slotted geometry that keeps temperatures in check and bite consistent, front axle, through every stop.
Third-generation corrosion protection. EBC coats every GD Series rotor with a silver corrosion-resistant finish that guards the hat and vane areas between pad sweeps. The finish keeps rotors looking sharp and prevents the surface rust that can roughen initial bite after the car sits overnight.
Wide-aperture slots and dimple drilling work together. The slots draw cool air under the pad-to-rotor interface, expelling heat, water, mud, and brake dust from the contact zone during heavy braking. EBC pioneered dimple drilling in the 1990s specifically to provide pad degassing without through-drilling holes that create stress risers and promote rotor cracking. The result is cleaner, more consistent pad contact and reduced fade potential under repeated hard stops.
R90-approved blanks, 100% quality verified. EBC machines all GD Series rotors from R90-approved blanks, with the majority cast in EU facilities operating to ISO and BS5750 standards. Every rotor goes through a full runout inspection, metallurgy check, and dimensional verification before release. Slotting is performed in-house at EBC facilities in the UK or Las Vegas, and each rotor is balanced and runout-inspected a final time before it ships.
Product Benefits
- Dimple-Drilled Design: Allows pad degassing without through-holes, reducing the risk of rotor cracking under thermal stress.
- Wide-Aperture Slots: Expel heat, water, dust, and debris from the braking surface for more consistent pad contact.
- Third-Gen Corrosion Coating: Silver corrosion-resistant finish protects vanes and hat between braking cycles.
- R90-Approved Blanks: Machined from blanks that meet European R90 safety standards for rotor replacements.
- 100% Pre-Ship Inspection: Every rotor is checked for runout, metallurgy, and dimensional accuracy before leaving the facility.
- Front Axle Fitment: Engineered specifically for the front braking position on 2015-2023 Mustang EcoBoost models.
- Even Pad Wear: Slot geometry promotes consistent pad contact across the full sweep area.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing rotors, pads, and brake lines for street performance and track applications. EBC operates machining and slotting facilities in the UK and the United States, applies strict incoming quality controls to all sourced castings, and validates rotor geometry and metallurgy through 100% inspection before any product ships to the customer.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | EcoBoost Premium, EcoBoost, V6 |
| Vehicle Fitment | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 |
| FMSI Pad No. | D1791 |
