Rear rotors on a work-use or tow-rated F-150 take a beating that stock iron struggles to manage. EBC's GD7604 GD Sport Rotors give the 2012-2014 F-150 3.5L EcoBoost 2WD 7-lug rear axle a third-generation slotted and dimple-drilled upgrade that runs cooler, resists corrosion, and maintains consistent stopping power under repeated hard use.
Wide-aperture slots engineered for thermal management. The GD series slot geometry draws cool air under the pad-to-rotor interface, where braking temperatures can exceed 1,000 degrees Fahrenheit at the heart of the pad during heavy stops. By channeling that airflow across the contact zone, the slots reduce the heat buildup that causes brake fade and expel dirt, mud, water, and dust that degrade pad bite.
Dimple drilling without the cracking risk. EBC developed the dimple-drilled rotor in the 1990s as a solution to the structural weakness of through-drilled rotors. Full through-holes concentrate stress and promote cracks under thermal cycling; dimples provide the same pad-degassing benefit while preserving the integrity of the rotor face.
Third-generation corrosion protection. Every GD series rotor carries a silver corrosion-resistant finish that protects the rotor body between brake applications, where bare iron rusts quickly. The coating extends rotor service life and keeps the hat and vane areas from corroding through in climates with road salt or high humidity.
R90-approved blanks, 100% inspected before release. GD series rotors are machined in the UK from R90-approved blanks, with castings sourced from ISO and BS5750 accredited foundries. Before shipment, every rotor passes a 100% runout, metallurgy, and dimensional check, followed by balance and runout inspection. USA-market sport rotors receive their slotting at EBC's Las Vegas facility or at the UK operation.
Product Benefits
- Direct Rear Fitment: Sized and drilled for the 2012-2014 F-150 3.5L EcoBoost 2WD 7-lug rear axle.
- Wide-Aperture Slots: Draw cool air into the pad interface, lower rotor temperatures, and expel debris.
- Dimple-Drilled Face: Promotes pad degassing without through-holes that cause stress cracks.
- Corrosion-Resistant Finish: Third-generation silver coating protects the rotor body between braking events.
- R90-Approved Blanks: Castings sourced from ISO and BS5750 certified foundries and fully machined in the UK.
- 100% Pre-Release Inspection: Every rotor passes runout, metallurgy, dimensional, and balance checks before leaving the facility.
- Even Pad Wear: Slot geometry promotes consistent pad contact across the full braking surface.
About EBC Brakes: EBC Brakes is a UK-based brake specialist with manufacturing and finishing operations in the United Kingdom and the United States. The company produces a full range of brake pads, rotors, and brake lines for street, tow, and track applications, and subjects every product to strict dimensional, metallurgical, and runout standards before release.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | XL, XLT |
| Vehicle Fitment | 2012, 2013, 2014 |
| FMSI Pad No. | D1602 |
