Stock rotors on the 2000-2004 F-150 4.2L 2WD handle everyday driving, but they were not optimized for the heat and fade that come with hard braking, heavy loads, or spirited driving. EBC's GD7132 GD Sport Rotors replace the factory front units with a slotted, dimple-drilled design built to run cooler and last longer under real-world stress.
Wide-aperture slots that actively cool the braking surface. The GD series slots draw cool air beneath the pad-to-rotor interface during heavy braking, where contact temperatures can exceed 1,000 degrees Fahrenheit. Keeping that interface cooler reduces brake fade, maintains consistent pedal feel, and extends pad life by promoting even wear across the full contact surface.
Dimple drilling without the cracking risk. EBC pioneered the dimple-drilled rotor concept in the 1990s as an alternative to through-drilling. Through-drilled holes concentrate stress and can initiate cracks over time; the dimple format delivers the same pad degassing benefit without compromising rotor integrity.
Corrosion-resistant finish, third-generation construction. Every GD series rotor carries a silver corrosion-protection coating that resists surface rust and keeps the rotor looking clean between brake applications. The blanks are R90-approved, with the majority cast in the EU, and EBC machines each rotor to finished spec in the UK. Before release, every unit goes through a 100% runout check, metallurgy inspection, and dimensional verification, then a balance and runout inspection confirms it is within tolerance.
Confirmed fitment for 4-wheel ABS applications. The GD7132 is validated specifically for the 2000-2004 F-150 4.2L 2WD equipped with 4-wheel ABS and the 7-lug hub configuration, so it integrates with the factory ABS sensors and hardware without modification.
Product Benefits
- Wide-Aperture Slots: Channel cool air under the pad contact zone to reduce fade during sustained or heavy braking.
- Dimple-Drilled Design: Provides pad degassing without through-holes that can promote rotor cracking.
- Silver Corrosion Protection: Third-generation coating resists surface rust for a cleaner, longer-lasting rotor.
- R90-Approved Blanks: Certified raw material standard ensures consistent metallurgy and structural integrity.
- 100% Pre-Ship Inspection: Every rotor passes runout, metallurgy, dimensional, and balance checks before leaving the facility.
- Direct Fitment: Confirmed for 2000-2004 F-150 4.2L 2WD with 4-wheel ABS and 7-lug hubs.
- No Modification Required: Bolts to the factory hub and works with the OEM ABS hardware.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing pads, rotors, and brake line components across a wide range of automotive, motorcycle, and powersports applications. GD series rotors are machined in the UK from R90-approved blanks, with production facilities operating to ISO and BS5750 quality standards, and every finished unit is subject to strict dimensional, metallurgical, and runout verification before release.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, Lariat, XL, XLT, King Ranch |
| Vehicle Fitment | 2000, 2001, 2002, 2003 |
| FMSI Pad No. | D702 |
