Stock brake pads on the 2015-2020 F-150 2.7 EcoBoost 2WD were spec'd for average loads and average driving, not for a truck carrying a payload, towing, or running larger-diameter tires that multiply the mechanical demand on every stop. EBC's ED93037 Extra Duty rear pads close that gap with a higher-friction, higher-heat compound built specifically for trucks.
Higher friction where trucks need it most. Larger outside-diameter tires increase the effective rolling radius, which means the braking system must work harder to produce the same deceleration. A higher-friction pad reduces the pedal pressure and caliper load required to achieve confident stops, keeping the pedal feel firm rather than spongy under heavy deceleration.
Heat resistance matched to real truck duty cycles. A loaded F-150 generates significant kinetic energy during hard stops. The Extra Duty compound maintains friction stability at elevated temperatures, so fade resistance stays consistent whether you are descending a grade with a trailer or making repeated stops in stop-and-go traffic.
Made entirely from aramid and minimal steel fiber. EBC manufactures the ED+ range 100 percent in their UK factory using aramid fibers with a small amount of steel fiber in the blend. That material choice produces lower rotor wear compared to more abrasive compounds, and dusting is minimal, keeping wheels cleaner between washes.
A cost-effective first step before committing to a big brake kit. Many F-150 owners do not need larger rotors or calipers. Swapping to a premium high-friction pad addresses the most common truck brake complaints, including soft pedal feel and fade under load, at a fraction of the cost of a full brake system upgrade.
Product Benefits
- Rear Fitment: Engineered specifically for the rear axle of the 2015-2020 F-150 2.7 EcoBoost 2WD.
- Extra Duty Compound: Higher friction rating than standard replacement pads for improved stopping power under load.
- High Heat Stability: Compound maintains consistent friction through elevated brake temperatures common in truck use.
- Rotor-Friendly Formula: Aramid and minimal steel fiber blend reduces rotor wear versus more aggressive compounds.
- Low Dust: Minimal brake dust keeps wheels cleaner during normal use.
- UK Manufactured: Every pad in the ED+ range is produced 100 percent at EBC's own UK factory.
- Direct Replacement: Drops into the factory caliper without modifications.
About EBC Brakes: EBC Brakes is a UK-based brake specialist with a broad catalog covering passenger cars, trucks, and performance vehicles. The company manufactures its pad and rotor products in-house and offers multiple compound grades so drivers can match friction characteristics to their specific use case.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2015, 2016, 2017, 2018 |
| FMSI Pad No. | D1790 |
