Stock brake pads on the 2013-2016 Ford Escape were intended for average daily driving. EBC Greenstuff 2000 rear pads close that gap with a higher initial brake effect and a nominal friction coefficient of 0.55, giving the driver confident, predictable stopping from the first pedal application.
Immediate response right out of the box. A red brake-in surface coating pre-conditions the pad face so the pads deliver safe, effective braking as soon as installation is complete, skipping the long and cautious bedding period that bare friction material typically requires.
Cleaner wheels without sacrificing stopping power. Greenstuff 2000 is formulated as a medium-to-low dust compound. Some dust is unavoidable in any friction system, but what the EBC pad does produce washes off easily, keeping the Escape's wheels cleaner between detail sessions.
An environmentally compliant formula that still performs. The Greenstuff 2000 compound contains no lead, copper, or toxic sulfides, satisfying current environmental legislation. The compound also carries ECE R90 approval, the European highway brake safety standard, confirming it meets rigorous independent performance and consistency requirements.
Secure pad-to-backing-plate bond. EBC uses Nucap NRS hook technology to mechanically lock the friction material to the steel backing plate, eliminating the separation risk that adhesive-only bonds carry under repeated heat cycles.
Product Benefits
- Direct Replacement Fitment: Rear axle fit for 2013-2016 Ford Escape 1.6L and 2.0T, including 4WD variants.
- High Initial Bite: Nominal 0.55 friction coefficient delivers confident stopping from the first pedal press.
- 10-15% Brake Improvement: Reduces stopping distances compared to standard OEM-equivalent pads.
- Red Brake-In Coating: Pre-conditioned surface allows safe braking immediately after installation.
- Medium-to-Low Dust: Less residue than typical pads, and what is generated washes off easily.
- ECE R90 Approved: Meets the European highway brake safety standard for highway use.
- No Lead, Copper, or Toxic Sulfides: Environmentally compliant formulation with no sacrifice in street performance.
- Nucap NRS Hook Technology: Mechanical pad-to-plate bond prevents delamination under heat cycling.
- Improved Heat Fade Resistance: Maintains consistent friction at higher speeds compared to stock pads.
About EBC Brakes: EBC Brakes manufactures friction products for street, sport, and competition applications across a wide range of vehicles. The company's tiered compound lineup, from Greenstuff through Yellowstuff, Redstuff, and race-focused Bluestuff, allows drivers to match pad characteristics to their specific driving demands.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | SE, SEL, Titanium |
| Vehicle Fitment | 2013, 2014, 2015, 2016 |
| FMSI Pad No. | D1095 |
