Stock brake pads on the Bronco Raptor were calibrated for the factory wheel and tire package. Bolt on oversized rubber, add a lift, or start towing near the truck's limits, and that stock friction level becomes a liability. EBC's Yellowstuff front brake pads close that gap with an aramid fiber compound that delivers a full FMVSS friction grade above most OEM pads.
Serious stopping power without rotor sacrifice. The Yellowstuff compound carries an average friction coefficient of 0.5, which translates to noticeably stronger pedal feel after the initial bed-in. Despite the elevated friction level, the aramid fiber formula remains gentle on rotors and resists the vibration that harder compounds can induce.
Zero fade under sustained abuse. Repeated heavy braking, long descents, or towing near capacity are exactly where stock pads fall apart. The Yellowstuff formula handles repeated high-heat cycles without the friction drop-off that causes that spongy, lengthening pedal feel. The compound is race-developed and has been validated in off-road desert racing environments where brake abuse is continuous.
Ready to grip from the first stop. Each pad ships with a red break-in surface coating that delivers safe, predictable braking immediately after installation, before the full bed-in cycle is complete. No lengthy warm-up ritual, no white-knuckle first drive.
Built for trucks that have been modified. Oversize tire and wheel conversions increase rotational inertia and raise the demand on the brake system. The Yellowstuff compound was developed specifically to address that gap in trucks, Jeeps, and SUVs running setups that exceed OEM brake calibration assumptions. It also excels in high-load applications, including towing and stretched vehicle builds where stopping consistency under repeated use is critical.
Product Benefits
- High Friction Aramid Fiber Compound: Delivers a full FMVSS grade above most stock pads for stronger, more confident braking.
- Average 0.5 Friction Coefficient: Measurable improvement in stopping performance over OEM pads.
- Zero Brake Fade: Race-developed formula handles repeated heavy heat cycles without friction drop-off.
- Rotor Friendly: Minimal disc wear characteristics preserve rotor life despite the elevated friction level.
- Red Break-In Coating: Provides safe, immediate grip right after installation before full bed-in is complete.
- Oversize Fitment Ready: Engineered to compensate for the added rotational inertia of lift kits and larger tire and wheel packages.
- Towing Capable: Handles sustained, heavy brake loads without performance fall-off, making it ideal for loaded tow rigs.
- Front Axle Specific: Designed and validated for front brake positions on the 2022+ Bronco Raptor.
About EBC Brakes: EBC Brakes manufactures friction products across a wide range of compounds, from street-oriented daily drivers to race-validated formulas. The Yellowstuff line represents EBC's high-friction truck and 4x4 category, developed with input from competitive off-road racing programs and validated against both street and heavy-duty towing applications.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL, XLT, Raptor |
| Vehicle Fitment | 2021, 2022, 2023 |
