EBC Yellowstuff front pads take braking up a notch an aramid fiber-based compound that delivers a 15 percent improvement in brake effect and drastically reduced stopping distances compared to factory pads.
Strong bite from cold, stronger under heat. Yellowstuff's high-friction formula provides excellent cold bite right away, then builds fade resistance as temperatures climb. The compound reaches its full performance threshold around 400 degrees Celsius, making it ideally suited for fast street driving where brakes cycle through aggressive heating and cooling without ever seeing sustained track-level temperatures.
Progressive feel with zero drama. The pad construction combines full shimming, slotting, and chamfering to produce smooth, quiet braking under all conditions. Pedal feel remains progressive and predictable rather than grabby, so threshold braking on the street stays controlled and confidence-inspiring. Nucap NRS mechanical hooks on the backing plate eliminate any chance of pad delamination from the plate over the life of the pad.
Ready to use from the first drive. Every Yellowstuff pad ships with EBC's Brake-In coating already applied, which accelerates the bedding process. On the street, full bed-in happens naturally within the first 100 to 200 miles of normal urban use. No special break-in runs or track sessions are required before the pads perform as rated.
Street legal and safety certified. Yellowstuff carries R90 approval, confirming compliance with European ECE brake safety regulations. That certification requires the pads to meet or exceed OEM stopping performance from cold, so they arrive pre-validated for highway use everywhere.
A note on track use. The current Yellowstuff formulation requires a longer bedding procedure than EBC's Bluestuff grade. Drivers planning dedicated track days who want to arrive with fresh pads and skip a lengthy bed-in session should consider Bluestuff as the better choice for that application. Yellowstuff remains the right answer for any fast street use scenario.
Product Benefits
- 15% Higher Brake Effect: High-friction aramid fiber compound improves stopping power over OEM pads.
- Excellent Cold Bite: Effective from the first pedal press without requiring a warm-up lap.
- Heat Fade Resistance: Compound strengthens under hard driving temperatures up to 400 degrees Celsius.
- Quiet Operation: Fully shimmed, slotted, and chamfered construction eliminates noise under all conditions.
- Brake-In Coating: Factory-applied coating shortens the initial bedding period on the street.
- NRS Mechanical Hooks: Nucap backing plate hooks prevent pad debonding over the full service life.
- R90 Approved: Certified for legal street use in European markets and validated for use worldwide.
- Front Fitment: Sized specifically for the 2015-2017 Mustang GT350 and GT350R front brake positions.
- UK Manufactured: Produced at EBC's facility in the United Kingdom.
About EBC Brakes: EBC Brakes is a UK-based manufacturer of friction products with a catalog spanning street, performance, and racing applications across motorcycles, passenger cars, and light trucks. EBC engineers its compounds in-house and subjects each grade to ECE brake safety testing before release, ensuring every pad meets or exceeds OEM stopping standards from cold.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Shelby GT350, Shelby GT350R |
| Vehicle Fitment | 2015, 2016, 2017, 2018, 2019, 2020 |
| FMSI Pad No. | D1853 |
