Stock brake pads on the 2011 F-150 3.5L EcoBoost were calibrated for an average driver hauling average loads. EBC Yellowstuff rear brake pads deliver a full FMVSS friction grade above OEM, giving drivers who tow, run oversized wheels, or simply push the truck hard a stopping advantage that feels immediate from the first press of the pedal.
High-friction aramid fiber compound. Yellowstuff uses an aramid fiber formulation with an average friction coefficient of 0.5, making it noticeably stronger at the pedal than factory pads. The compound resists rotor vibration and carries minimal disc damage characteristics, so rotors last through repeated heavy stops.
Zero brake fade under sustained load. Repeated hard braking, steep descents while towing, or back-to-back stops that would push standard pads into fade territory are where Yellowstuff holds its footing. The race-developed friction material handles heavy heat without the brake fall-off that plagues OEM compounds under abuse.
Ready to work straight out of the box. Each pad ships with a red brake-in surface coating that promotes safe, effective braking immediately after installation, cutting down the bedding window and getting the compound up to operating friction levels faster.
Proven in extreme applications. Beyond towing and oversize tire fitments, the Truck Yellowstuff compound has been tested in off-road desert racing conditions and validated in stretched commercial limousine applications where PSV compliance testing showed a documented 30 percent brake improvement over stock pads.
Product Benefits
- Rear Fitment: Designed specifically for the rear axle of the 2011 F-150 3.5L EcoBoost 6-lug configuration.
- Aramid Fiber Formula: High-friction compound with an average coefficient of 0.5, a full FMVSS grade above most OEM pads.
- Zero Fade Design: Race-derived material handles repeated hard stops and sustained towing heat without brake fall-off.
- Rotor Friendly: Minimal disc damage characteristics extend rotor life alongside the pad upgrade.
- Red Brake-In Coating: Pre-applied surface coating allows safe, effective braking immediately after installation.
- Oversize Wheel Compatible: Engineered to handle the added rotational mass of aftermarket wheel and tire upgrades.
- Dust Level: Similar to or slightly more than OEM; not a low-dust compound, but acceptable for daily driving and towing.
About EBC Brakes: EBC Brakes develops friction compounds for street, track, and commercial applications. The Yellowstuff lineup grew from EBC's motorsport program and has since been validated in commercial fleet use, desert racing, and overland applications across American trucks, Jeeps, and SUVs.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | FX4, Lariat, STX, King Ranch, Harley-Davidson Edition, FX2, Limited, THE 60TH ANNIVERSARY EDITION, XL, XLT, XTR, Platinum, SVT Raptor, Lariat Limited |
| Vehicle Fitment | 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| FMSI Pad No. | D1012 |
