Stock brake pads on the 2000-2004 Focus 2.0 were calibrated for everyday commuting, not the kind of driving that demands consistent, confident stopping power under heat and load. EBC Yellowstuff front pads replace that compromised OEM friction material with an aramid fiber-based compound that delivers 15 percent more brake effect from cold and keeps building grip as temperatures rise.
Excellent cold bite with high-temperature fade resistance. Yellowstuff engages firmly the moment you touch the pedal, then grows stronger under the heat of hard driving. The compound carries a green fade threshold of 400 degrees Celsius, covering the full temperature range expected in fast street use without the fade that follows OEM pads into hard corners or long downhill runs.
Progressive, predictable pedal feel. Braking force builds linearly with pedal pressure rather than spiking abruptly, which gives the driver precise control over stopping distance. Fully shimmed, slotted, and chamfered construction keeps noise suppressed under all conditions, so the improved stopping power does not come at the cost of squealing or harshness.
Ready to bed in from the first drive. Each pad ships with EBC's Brake-In coating, which accelerates the bedding procedure so the compound transfers correctly to the rotor surface without requiring a dedicated track session. On the street, the process completes naturally within the first 100 to 200 miles of urban use.
Built to stay bonded and street-legal. Nucap NRS mechanical hooks on the backing plate bond the friction material to the steel without relying on adhesive alone, eliminating the risk of pad delamination. The compound carries R90 certification, confirming it meets European public highway brake safety standards and performs at least as well as OEM pads from cold in regulated testing.
Product Benefits
- 15% Higher Brake Effect: Aramid fiber formula improves stopping power over OEM by a confirmed 15 percent.
- Strong Cold Bite: Engages confidently from ambient temperature without requiring a warm-up lap.
- Heat Fade Resistance: Compound strengthens under heat up to 400 degrees Celsius, covering the fast street temperature range.
- Drastically Reduced Stopping Distances: Measurable improvement over stock pads in real-world braking scenarios.
- Super Quiet Operation: Fully shimmed, slotted, and chamfered construction suppresses noise under all conditions.
- Brake-In Coating: Factory-applied coating accelerates pad bed-in without a dedicated high-heat session.
- NRS Mechanical Bonding: Nucap hooks prevent pad delamination from the backing plate over the life of the pad.
- R90 Approved: Certified street-legal for public highway use in European markets.
- UK Manufactured: Produced in the United Kingdom to EBC's own quality standards.
About EBC Brakes: EBC Brakes is a UK-based manufacturer specializing in friction materials for street performance, towing, and motorsport applications. The company produces brake pads, rotors, and brake lines for a broad range of vehicles and compound grades, from low-dust daily drivers to purpose-built race compounds, all manufactured to ECE brake safety standards.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | LX, SE, ZTS, ZTW, ZX3, ZX5 |
| Vehicle Fitment | 2000, 2001, 2002, 2003, 2004 |
| FMSI Pad No. | D816 |
