EBC's Yellowstuff compound delivers a 15 percent improvement in brake effect over OEM pads, with cold bite and heat resistance that keeps stopping distances short when the roads get serious.
Aramid fiber compound with real-world stopping power. Yellowstuff uses an aramid fiber-based formula that generates strong friction from cold and builds even more grip as temperatures rise. Progressive pedal feel gives the driver precise modulation rather than the binary on-off response of a purely track-focused compound, making these rear pads equally capable on a weekend canyon run or a spirited highway on-ramp.
Engineered construction that eliminates common failure points. Every pad ships with full shimming, slotting, and chamfering for super quiet, smooth braking under all conditions. Nucap NRS mechanical hooks bond the friction material to the backing plate at a structural level, eliminating pad debond as a failure mode entirely. EBC's Brake-In coating accelerates the bedding process so the pads reach full performance sooner after installation.
Street-legal and heat-tested. Yellowstuff carries R90 approval, confirming compliance with European public highway brake safety regulations. ECE brake safety testing requires these pads to perform at least as well as stock from cold, and they exceed that baseline once heat builds in the system. The green fade threshold sits at approximately 400 degrees Celsius, which covers the full temperature range expected in fast street driving. For dedicated track sessions where brake temperatures can climb above 500-600 degrees Celsius, EBC recommends stepping up to their Bluestuff formulation instead.
Product Benefits
- 15% Higher Brake Effect: High-friction aramid formula improves stopping power over OEM pads by a confirmed 15 percent.
- Strong Cold Bite: Generates usable friction immediately from cold, before the system has had time to warm up.
- Heat Fade Resistance: Compound strengthens under hard driving heat rather than losing friction at the pedal.
- NRS Mechanical Hooks: Nucap NRS technology bonds friction material to the backing plate, eliminating pad debond.
- Quiet Operation: Fully shimmed, slotted, and chamfered construction for smooth, noise-free braking in all conditions.
- Brake-In Coating: Factory-applied coating shortens the bedding period and brings pads to full performance faster.
- R90 Approved: Legal for public highway use in European markets and safe for street use everywhere.
- Rear Fitment: Sized specifically for the rear axle of 1994-2004 Mustang 4.6L Cobra applications.
- UK Manufactured: Produced in EBC's UK facility to consistent quality standards.
About EBC Brakes: EBC Brakes is a UK-based manufacturer specializing in aftermarket brake friction products, with a catalog covering passenger cars, trucks, SUVs, motorcycles, and motorsport applications. Their Yellowstuff grade is one of the world's top-selling performance brake pad compounds, validated through ECE R90 safety testing and used across fast street and entry-level competition driving globally.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base, SVT Cobra, GT Bullitt, SVT Cobra 10th Anniversary |
| Vehicle Fitment | 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 |
| FMSI Pad No. | D627 |
