The EBC Redstuff DP31869C front pads for the 2010-2014 Mustang V6 3.7L deliver a 15 percent improvement in braking effect and a dramatic cut in wheel dust, without sacrificing the cold-bite confidence you need every time you pull out of the driveway.
Lowest-dust formula in EBC's lineup. Redstuff's aramid fiber and ceramic compound reduces brake dust by 50 to 90 percent compared to semi-metallic pads. The residual dust that does appear contains no steel fiber particles, so a simple sponge wash clears it from your wheels completely.
Cold-bite performance from the first press of the pedal. These pads grip as well as OEM compounds from a cold start and improve progressively as temperatures rise. MIRA-witnessed testing showed Redstuff stopping a car nearly 50 feet shorter from 100 mph, representing a 30 percent braking improvement over stock pads with a nominal friction coefficient of 0.5.
EBC Brake-In surface coating ships on every pad. The red surface layer conditions the rotor and accelerates the bed-in process from the moment of installation, providing safe, consistent stopping before the pad has fully seated. Full bed-in on this hard-wearing compound can take up to 1,000 miles, so patience during the break-in period pays dividends in long-term performance and rotor longevity.
Nucap NRS backplate hooks prevent pad debond. Mechanical retention hooks machined into the backplate lock the friction material to the steel backing, eliminating the risk of delamination under repeated heavy braking cycles. The compound also carries ECE R90 brake safety approval, confirming it meets European replacement brake regulation standards.
Product Benefits
- 15% Brake Improvement: Higher friction formula shortens stopping distances compared to OEM pads.
- 50-90% Dust Reduction: Aramid fiber and ceramic compound produces far less dust than semi-metallic alternatives.
- Steel-Fiber-Free Dust: Residual dust washes off wheels easily with no metallic staining.
- Strong Cold Bite: Matches or exceeds OEM grip from a cold start and improves as heat builds.
- Brake-In Coating: Red surface layer conditions rotors and enables safe braking immediately after install.
- NRS Mechanical Retention: Nucap hooks on the backplate eliminate pad debond risk under hard use.
- ECE R90 Approved: Meets European brake safety regulation standards for most passenger car fitments.
- Minimal Rotor Wear: Low-aggression compound extends rotor life during repeated heavy braking.
About EBC Brakes: EBC Brakes is a specialist brake manufacturer producing friction compounds, rotors, and complete brake kits for performance street and motorsport applications. Products are developed and tested at recognized facilities including the UK's Motor Industries Research Association, with compounds validated across a wide range of vehicles and driving conditions.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base |
| Vehicle Fitment | 2010 |
| FMSI Pad No. | D1464 |
