Built for the Brembo calipers fitted to 2005-2009 Saleen Mustangs, EBC Redstuff pads deliver front-axle stopping power that outperforms OEM compounds from the first cold application, then improves further as heat builds.
Ceramic compound that bites cold and holds under heat. The aramid fiber base enhanced with ceramic particles produces a nominal friction coefficient of 0.5, delivering a 15 percent brake improvement over stock. Tested at the UK Motor Industries Research Association (MIRA), Redstuff reduced stopping distance by nearly 50 feet from 100 mph, a documented 30 percent improvement in braking performance.
The lowest dust rating EBC offers. Redstuff cuts brake dust by 60 to 90 percent compared to semi-metallic compounds, and the minimal residue it does leave contains no steel fiber particles, so a simple sponge wash clears the wheels completely. Prestige car owners running expensive alloys will notice the difference immediately.
Brake-In surface coating accelerates bed-in. Every set ships with EBC's red Brake-In coating pre-applied to the pad face, which conditions the rotor surface and begins the bed-in process from the first stop. Because Redstuff is a hard-wearing compound, full bed-in can take up to 1,000 miles; patience during that period pays off with consistent, fade-resistant performance afterward.
Engineered to protect rotors and stay bonded. The compound carries very minimal rotor damage characteristics, extending disc life alongside pad life. Nucap NRS mechanical hooks are integrated into the backplate, eliminating pad debond entirely, so the friction material stays locked to the backing plate under repeated heavy brake use.
Product Benefits
- Saleen Brembo Fitment: Sized specifically for the front Brembo calipers on 2005-2009 Saleen Mustangs.
- 60-90% Dust Reduction: Lowest dust rating in the EBC lineup; no steel fiber particles in residue.
- 15% Brake Improvement: Higher friction formula over OEM pads, proven in independent MIRA testing.
- Cold Bite: Grips effectively from ambient temperature and improves as the compound heats up.
- Brake-In Coating: Red pre-applied surface treatment conditions rotors and accelerates safe pad bed-in.
- Nucap NRS Hooks: Mechanical retention system on the backplate prevents pad debond under sustained heavy braking.
- ECE R90 Approved: Meets European brake safety regulation standards for passenger car applications.
- Rotor-Friendly: Aramid ceramic compound minimizes disc wear over the pad service life.
About EBC Brakes: EBC Brakes manufactures friction products across a wide range of compounds and applications, from street-oriented low-dust ceramics to dedicated track compounds. Each product line targets a specific driving profile, with independent testing and regulatory approvals backing the performance claims.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2005, 2006, 2007, 2008, 2009 |
