Stock brake pads on the 2010-2014 Mustang V6 3.7L strike a compromise between cost and stopping power that leaves room for improvement. EBC's Greenstuff DP21870 rear pads close that gap with a higher-friction compound that delivers a confident, progressive feel from the first press of the pedal.
Strong initial bite, every time. Greenstuff carries a nominal friction coefficient of 0.55, translating to a 10-15% brake improvement over standard pads. That extra bite is available immediately, not after a long warm-up cycle, so daily driving and highway on-ramps both benefit equally.
Cleaner wheels without sacrificing performance. The 2000 Series compound generates less brake dust than most OEM-style materials, and what dust does accumulate rinses off more easily. The formulation contains no lead, copper, or toxic sulfides, meeting all current environmental legislation including ECE R90 approval for highway use across all applicable markets.
Ready to work straight out of the box. Each pad ships with a red brake-in surface coating that activates safe stopping friction immediately after installation, eliminating the extended bedding process that bare compound pads typically require. Underneath that coating, Nucap NRS hook technology mechanically bonds the friction material to the backing plate, preventing delamination over the life of the pad.
Improved resistance to heat fade. The Greenstuff compound handles the elevated temperatures that come with higher-speed street driving better than standard pads, maintaining consistent pedal feel when the brakes are working hardest. For track-day or dedicated performance driving, EBC's Yellowstuff, Bluestuff, or RP and SR series pads are the appropriate step up.
Product Benefits
- Direct Replacement Fit: Bolt-in rear fitment for 2010-2014 Mustang V6 3.7L with no modifications required.
- 10-15% Brake Improvement: Nominal 0.55 friction coefficient over stock pad performance.
- Instant Safe Braking: Red brake-in coating delivers immediate friction from first use.
- Reduced Dust: Lower dust output than most OEM materials, with easier wheel cleanup.
- Eco-Friendly Formula: No lead, copper, or toxic sulfides; compliant with all current environmental regulations.
- ECE R90 Approved: Meets the European highway brake safety standard for applicable vehicles.
- Nucap NRS Technology: Mechanical hook bonding secures friction material to the backing plate permanently.
- Heat Fade Resistance: Maintains consistent pedal feel at higher street speeds.
About EBC Brakes: EBC Brakes manufactures friction products for street, sport, and racing applications across a wide range of vehicles. The company develops distinct compound grades for specific use cases, allowing drivers to match pad performance to their actual driving demands rather than settling for a single all-purpose formula.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base |
| Vehicle Fitment | 2010, 2011, 2012 |
| FMSI Pad No. | D1465 |
