Stock brake pads on the 2010-2014 Mustang V6 3.7L feature quiet, low-cost operation rather than confident pedal feel. EBC's Greenstuff DP21869 front pads deliver a high initial bite the moment your foot touches the pedal, cutting stopping distances by a nominal 10 to 15 percent over OEM without demanding a warm-up lap.
Strong bite from a cold pedal. Greenstuff 2000 series pads generate a high initial braking effect, so the confidence you feel on the first stop of the morning holds through everyday driving. The nominal friction coefficient of 0.55 keeps response predictable across a wide temperature range.
Cleaner wheels with less scrubbing. These pads produce less dust than most street compounds, and the dust that does form washes off easily. No brake pad eliminates dust entirely, but Greenstuff keeps it manageable through normal daily driving cycles.
Environmentally compliant materials. The compound contains no lead, copper, or toxic sulfides, meeting current and upcoming environmental legislation. ECE R90 approval confirms highway-use compliance for European safety standards, and the formulation qualifies as a direct OEM replacement without any modifications to the caliper or bracket.
Ready to stop from the first drive. A red brake-in surface coating on the pad face provides safe braking immediately after installation, reducing the typical bedding period. Nucap NRS hook technology bonds the friction material to the backing plate mechanically, eliminating any risk of delamination over the pad's service life.
Product Benefits
- High Initial Bite: Strong pedal feel from a cold start with a nominal 0.55 friction coefficient.
- 10 to 15 Percent Shorter Stops: Measurable improvement over stock stopping distances under normal street use.
- Reduced Dust: Lower dust output than most street compounds; residue washes off easily.
- ECE R90 Approved: Meets European highway brake safety regulations and all current environmental legislation.
- No Lead, Copper, or Toxic Sulfides: Eco-friendly compound safe for street use and compliant with environmental standards.
- Red Brake-In Coating: Factory-applied surface layer enables safe braking immediately after installation.
- Nucap NRS Hook Technology: Mechanical pad-to-plate bond prevents delamination and ensures consistent performance.
- Direct OEM Replacement: Bolt-in fit for the front axle of 2010-2014 Mustang V6 3.7L with no hardware modifications.
About EBC Brakes: EBC Brakes develops friction products for street, performance, and motorsport applications, offering a full range of compounds from daily-driver grades through dedicated race pad series. Each compound in the lineup targets a specific use case, giving drivers a clear path to upgrade as performance demands increase.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | Base |
| Vehicle Fitment | 2010 |
| FMSI Pad No. | D1464 |
