Stock brakes on the Ranger Raptor were calibrated for a truck that hauls gear and tows trailers, not one that gets pushed hard on trails or track days. The EBC Racing BBK048BLK-1 Apollo-6 Big Brake Kit replaces the entire front braking system with a 355x32mm rotor and a six-piston caliper, then backs it up with matching rear friction pads and braided stainless lines front and rear, so every corner of the truck stops in proportion.
Balanced braking across all four corners. Most big brake kits stop at the front axle, leaving the rear to catch up with stock pads and rubber lines. EBC's Balanced Big Brake Kit philosophy addresses the full vehicle: upgraded front hardware, matching Yellowstuff rear pads sized for the factory caliper, and braided stainless brake lines at both ends. The result is a firm, progressive pedal with no imbalance between the axles under hard braking.
Apollo-6 calipers built entirely in the United Kingdom. The six-piston Apollo Series calipers are cast, machined, painted, and assembled in the UK. Caliper brackets and the disc bell are machined from aerospace-grade billet aluminum for strength without unnecessary mass. Every metal fitting, bleed nipple, and disc drive bobbin is stainless steel, so corrosion does not compromise hardware over time.
Yellowstuff pads included front and rear. EBC's Yellowstuff compound covers fast street driving and track use from the first lap. The pads come pre-bedded at the compound level and are included in the kit alongside all hardware needed to complete the full installation without a separate pad purchase.
All hardware included, no supplemental sourcing required. Every component needed to replace the factory front brake system ships in the box: rotors, calipers, pads, braided lines, mounting brackets, and hardware. No separate line kits, no bracket hunting, no adaptation required.
Product Benefits
- Balanced Full-Vehicle Upgrade: Front BBK plus matching rear Yellowstuff pads and braided stainless lines at all four corners.
- Apollo-6 Six-Piston Caliper: Cast, machined, and assembled entirely in the United Kingdom from aerospace-grade billet aluminum.
- 355x32mm Front Rotor: Larger swept area increases thermal capacity and reduces brake fade under sustained hard use.
- Stainless Steel Hardware Throughout: Every fitting, bobbin, and bleed nipple is stainless to prevent corrosion.
- Yellowstuff Compound: EBC's flagship fast-street and track pad included front and rear in the kit.
- Braided Stainless Lines: Front and rear lines included, eliminating the spongy pedal feel of OEM rubber hoses.
- Black Caliper Finish: Powder-coated black finish for a clean, purposeful appearance behind the wheel.
- Complete Kit: All mounting hardware, brackets, and fasteners included for a full front brake system replacement.
- Direct Fitment: Engineered specifically for the 2023+ Ranger Raptor front axle.
About EBC Racing: EBC Brakes manufactures friction, rotor, and caliper products at its UK facility, supplying road, track, and competition applications across a wide range of vehicles. The Apollo Series calipers represent the brand's commitment to British engineering, with every stage of production, from casting through final assembly, completed in the United Kingdom.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Fitment | 2023, 2024, 2025, 2026 |
