Stock S197 Mustang GT brakes were calibrated for street driving, not sustained hard stops at the track. The EBC Racing BBK016RED-1 Apollo-4 Big Brake Kit replaces the entire front braking system with a 355mm rotor and four-piston caliper setup, then adds matching rear friction pads and braided lines front and rear, so your braking force stays balanced from corner to corner.
Balanced braking, not just bigger front brakes. Every EBC Balanced Big Brake Kit ships with rear friction pads matched to the new front setup, plus braided stainless brake lines for both axles. Upgrading only one end of the car shifts the brake bias; this kit keeps it dialed in, delivering consistent pedal feel and fade resistance whether you are braking from triple digits on a back straight or scrubbing speed before a tight corner.
Apollo-4 calipers built and finished in the UK. EBC casts, machines, paints, and assembles the Apollo Series calipers entirely in the United Kingdom. Every metal caliper fitting and disc drive bobbin is stainless steel to resist corrosion, while the caliper brackets and disc bells are machined from aerospace-grade billet aluminum for strength without excess weight. The calipers come finished in red anodize, giving the kit a clean look behind open-spoke wheels.
Yellowstuff pads included from the factory. Each kit ships with EBC's Yellowstuff compound, a fast-street and track pad that reaches operating temperature quickly and sustains high friction levels through repeated hard stops. The firmer, more responsive pedal feel is noticeable immediately, and fade resistance improves the longer and harder you push.
Everything needed for a complete install. Hardware, braided lines, pads, rotors, and calipers all come in a single kit. No sourcing individual components, no guessing about fitment, and no need to reuse OEM hardware that has seen heat cycles.
Product Benefits
- 355mm Front Rotors: Larger swept area increases heat dissipation and reduces fade during sustained hard braking.
- Apollo-4 Red Calipers: Four-piston, UK-cast and assembled calipers with stainless steel fittings throughout.
- Balanced Kit Design: Rear Yellowstuff pads and braided lines for both axles are included, keeping brake bias consistent.
- Aerospace-Grade Aluminum: Caliper brackets and disc bells machined from billet aluminum for durability and reduced unsprung weight.
- Yellowstuff Pads Included: EBC's fast-street and track compound ships with every kit, front and rear.
- Braided Stainless Lines: Front and rear braided lines reduce expansion under pressure for a firmer, more consistent pedal.
- Stainless Steel Hardware: Every bleed nipple, caliper fitting, and drive bobbin resists corrosion over the long term.
- Complete Hardware Package: All mounting hardware included for a full OEM replacement of the front braking system.
- UK Engineered and Assembled: Apollo Series calipers are cast, machined, painted, and assembled in the United Kingdom.
About EBC Racing: EBC Brakes engineers and manufactures friction and braking system components from its UK facilities, supplying products for street, track, and competition use across a wide range of vehicles. The Apollo Series big brake kits reflect EBC's commitment to domestic production quality at accessible price points.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | GT, Bullitt, Base |
| Vehicle Fitment | 2006, 2005, 2007, 2009, 2008, 2010 |
