Stock brakes on the 2010-2014 Mustang GT 5.0L were calibrated for street driving, not sustained hard braking under track conditions. The EBC Racing Apollo-4 355mm Anodized Big Brake Kit replaces the entire front braking system with a purpose-built setup that delivers a firmer pedal, shorter stops, and fade resistance when you push past what the factory hardware can handle.
Balanced braking, front to rear. Unlike front-only kits that leave the rear axle as the weak link, this kit ships with matching Yellowstuff friction pads for the rear OEM calipers and braided stainless brake lines for both axles. Every component in the system is upgraded together, so the braking balance that engineers set from the factory is preserved at a dramatically higher performance threshold.
Apollo-4 calipers built entirely in the UK. EBC casts, machines, paints, and assembles the Apollo Series calipers at their UK facility. Every caliper metal fitting and disc drive bobbin is stainless steel to resist corrosion over the long term. Caliper brackets and the disc bell are machined from aerospace-grade billet aluminum, keeping unsprung weight low while delivering the structural rigidity that hard braking demands.
Yellowstuff pads included front and rear. EBC's Yellowstuff compound is their flagship fast-street and track formulation, offering strong initial bite and consistent friction through repeated high-temperature stops. The pads work with the 355mm rotors and Apollo-4 calipers to raise the thermal ceiling well beyond what the factory setup tolerates.
Complete hardware included. Every kit supplies all the hardware required to fully replace the equivalent OEM front braking components, including braided lines and rear friction pads. No additional parts are needed to complete the installation on a 2010-2014 Mustang GT 5.0L.
Product Benefits
- 355mm Front Rotors: Larger swept area increases thermal mass and braking torque over the OEM setup.
- Apollo-4 Anodized Calipers: Cast, machined, and assembled in the UK from aerospace-grade billet aluminum brackets.
- Stainless Steel Hardware: Every caliper fitting and disc drive bobbin resists corrosion for lasting durability.
- Balanced Axle Upgrade: Includes matching Yellowstuff rear pads for the factory calipers, not just front components.
- Braided Lines Front and Rear: Stainless braided brake lines reduce pedal expansion for a firm, consistent feel.
- Yellowstuff Compound: EBC's fast-street and track pad formulation handles repeated high-temperature stops without fade.
- Complete Kit: All hardware, lines, pads, and calipers included for a full front brake system replacement.
- Direct Fitment: Engineered specifically for the 2010-2014 Mustang GT 5.0L front axle.
About EBC Racing: EBC Brakes is a UK-based manufacturer producing friction materials and braking system components across street, track, and motorsport applications. The Apollo Series represents EBC's commitment to domestically manufactured performance hardware, with calipers engineered, cast, machined, and assembled entirely within the United Kingdom.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | GT, Boss 302, Base |
| Vehicle Fitment | 2010, 2011, 2012, 2013, 2014 |
