Stock brakes on the Focus ST MK2 handle daily commutes, but push harder on track or a spirited back road and the factory setup runs out of thermal capacity fast. The EBC Racing BBK011BLU-1 Blue Apollo-4 Big Brake Kit replaces the entire front braking system with a 330mm rotor and four-piston caliper package, then balances the upgrade axle-to-axle so the pedal behaves predictably at every speed.
Balanced braking, not just bigger front brakes. Most big brake kits stop at the front axle and leave you to sort the rear. Every EBC Balanced Big Brake Kit includes matching Yellowstuff friction pads for the rear OEM calipers and braided stainless brake lines for both the front and rear axles. A mismatched brake bias causes unpredictable pedal feel under hard stops; this kit eliminates that problem from the start.
Apollo-4 calipers built and finished in the United Kingdom. The Apollo Series four-piston calipers are cast, machined, painted, and assembled in the UK. Caliper brackets and the disc bell are machined from aerospace-grade billet aluminum for strength without excess weight. Every metal fitting and disc drive bobbin is stainless steel, so corrosion does not compromise clamping force or hardware integrity over time.
Yellowstuff pads included front and rear. EBC's Yellowstuff compound is rated for fast street and track use, delivering strong initial bite and consistent friction levels as temperatures climb. Including them at both axles means the brake balance the engineers intended is present from the first installation, not after a separate pad purchase.
Complete hardware supplied. Every kit ships with everything needed to fully replace the equivalent OEM braking components: calipers, 330mm rotors, pads front and rear, braided lines front and rear, and all associated hardware down to the bleed nipples. Nothing is left to source separately.
Product Benefits
- 330mm Front Rotors: Larger swept area absorbs and dissipates heat faster than the OEM disc, delaying fade under repeated hard stops.
- Apollo-4 Four-Piston Calipers: Blue anodized finish, cast and assembled in the UK from aerospace-grade billet aluminum brackets.
- Stainless Steel Hardware Throughout: Every metal fitting and disc drive bobbin resists corrosion for long service life.
- Balanced Axle Upgrade: Rear Yellowstuff pads and rear braided lines included, ensuring consistent brake bias front to rear.
- Braided Stainless Lines Front and Rear: Reduces line expansion under pressure for a firmer, more consistent pedal feel.
- Yellowstuff Pads Front and Rear: EBC's flagship fast-street and track compound, included at both axles.
- UK Engineered and Assembled: Apollo Series calipers are cast, machined, painted, and assembled entirely in the United Kingdom.
- Complete Kit: All hardware supplied; no separate sourcing required to complete the installation.
About EBC Racing: EBC Brakes is a British manufacturer specializing in performance friction and braking hardware, producing brake pads, rotors, and complete brake kits across motorsport and fast-road applications. The Apollo Series calipers reinforce EBC's commitment to UK-manufactured braking components built to compete with far more expensive alternatives.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | ST |
| Vehicle Fitment | 2012, 2013, 2014, 2015, 2016, 2017 |
