Stock brake components on the Fiesta ST MK7 were calibrated for daily driving, not the sustained heat cycles of a track day or spirited back-road session. The EBC Racing Apollo-4 Balanced Big Brake Kit replaces the entire braking system front to rear, delivering a firmer pedal, fade resistance, and balanced stopping power that the OEM setup simply cannot sustain.
A genuinely balanced brake upgrade. Unlike kits that address only one axle, this package includes anodized Apollo-4 four-piston calipers with 330mm rotors for the front, matching EBC Yellowstuff friction pads for the rear OEM calipers, and braided stainless brake lines for both axles. Every component works together so braking force stays predictable and balanced under hard use.
Apollo-4 calipers built to last. Each caliper is cast, machined, painted, and assembled in the United Kingdom from aerospace-grade billet aluminum brackets and stainless steel fittings. Every brake disc drive bobbin is stainless steel as well, so corrosion does not compromise the system over time. The anodized finish adds an additional layer of protection while giving the calipers a distinctive look behind the wheel.
Yellowstuff pads on both axles. EBC's flagship Yellowstuff compound handles fast street and track use, building heat quickly to reach optimal bite without requiring extensive warm-up laps. Pairing them front and rear keeps the brake bias consistent, so the car responds the same way lap after lap.
Everything you need, nothing you have to source separately. The kit ships with all necessary hardware to fully replace the equivalent OEM braking components, including braided lines front and rear. No additional parts lists, no hardware hunts at the local shop.
Product Benefits
- Balanced System Design: Front calipers, rotors, rear pads, and braided lines for both axles included in one kit.
- Apollo-4 Four-Piston Calipers: Anodized, engineered for 330mm rotors, and assembled entirely in the UK.
- Aerospace-Grade Aluminum Brackets: High-strength caliper brackets and disc bells machined for durability under sustained braking loads.
- Stainless Steel Hardware Throughout: Every caliper fitting and disc drive bobbin is stainless to resist corrosion.
- Yellowstuff Compound: EBC's fast street and track pad included front and rear for consistent bite and fade resistance.
- Braided Stainless Lines: Firmer, more consistent pedal feel versus rubber OEM lines on both axles.
- Direct Fitment, MK7 Fiesta ST 1.6T: Covers 2012-2017 applications with all required mounting hardware included.
- UK Engineered and Assembled: Every Apollo Series caliper is cast, machined, painted, and assembled in the United Kingdom.
About EBC Racing: EBC Brakes designs and manufactures brake pads, rotors, and brake system components for street, track, and competition use. The Apollo Series caliper line is produced entirely in the United Kingdom, reflecting EBC's commitment to precision manufacturing and quality control at every stage of production.
WARNING: California Residents: Cancer and Reproductive Harm;
www.p65warnings.ca.gov
Product Specifications & Vehicle Fitment
Review the product details and confirm compatibility with your vehicle before ordering.
| Specification | Details |
|---|---|
| Vehicle Trim | ST |
| Vehicle Fitment | 2012, 2013, 2014, 2015, 2016, 2017 |
