Cervini's Mustang GT500 Style Hood (2018-2021)

1 Review(s)
$1,124.99
$64.00 (6%)
$1,060.99
Change up the appearance of your S550 and give your Mustang an impressive look with the GT500 style hood from Cervini's. Built with aircraft grade materials for great strength and durability and made in the USA.
2-3 Weeks Built to Order
Part Number: 813 1245
1245

Choose Options

×
If Anderson Composites product is delivered defective or damaged, you must notify Steeda within 24 hours of delivery.

By checking this box, I accept these terms *

Write a Review

Description


This functional heat extractor hood is a great addition to your Mustang. The hood provides aggressive styling like the GT500 and gives your S550 a menacing look on the street. At car shows the hood really stands out due to a channel on the underside of the hood that conceals the washer nozzle hoses.

Stunning high-end custom look. The Cervini's hood gives your Mustang an eye-catching upgrade and a custom appearance. The hood offers great fitment and a clean, factory finish that always gets attention on the street or at shows. The functional heat extractor is the perfect addition to the stunning hood and a great example of Cervini's pursuit for perfection. The hood includes a drip tray to prevent water from dripping on your engine.

Industry-leading quality. Cervini's is the standard when it comes to aftermarket fiberglass and urethane automotive parts. Since 1991 Cervini's has been providing the aftermarket with quality parts and aggressive style. Parts are made in the USA from aircraft-grade materials.

Product Benefits: 
  • Menacing appearance
  • Great durability and strength
  • Simple installation
  • Show quality construction
  • Functional heat-extractor
  • Includes removable drip tray
*Will not fit the GT350

CA Residents: Cancer and Reproductive Harm WARNING www.p65warnings.ca.gov.


Hey guys, it's Chris from Steeda. And today, we're going to talk about the Cervini's GT500 style hood, fitting the 2016 to 2020 Shelby GT350! When the 2020 GT500 came out, there's absolutely no doubt that enthusiasts love that big louver in the center of the hood. It provided all kinds of additional cooling for the supercharged motor, and on top of that, it had a removable rain tray on the bottom that you can take out during track days for added cooling and aerodynamics. Cervini's saw the opportunity here and not only offered this style hood for 2016 to 2020 GT350's, but you can also get it for your 15 -17 Mustang and your 18+ Mustang, along with 2013 and 2014 Mustangs as well. So, if you're looking for that GT500 style on your particular S550 or even S197 mustang, this is the way to go. The best part about Cervini's is that they use fiberglass construction. It's ultra-high-quality. It fits absolutely awesome. It only took me about 10 minutes to align this hood perfectly in line with the fenders and everything else. I didn't need to move anything else in order to install this. And additionally, you have that ultra-cool vent in the middle with the removable rain tray on the bottom that you can take out for track days or anytime you need that added cooling or aerodynamics. You can get this hood pre-painted or unpainted and have your local body shop paint match perfectly. This hood was actually pre-painted from Cervini's and the paint match is pretty darn good considering they did not have the car to match it perfectly. Now for those GT350's that already had stripes from the factory, this is one of them. I went to a local vinyl shop and actually had these stripes installed and they match almost perfectly, once I was able to clean up the factory stripes a little bit, get some of those surface scratches and swirls off. Everything matches up perfectly in the sun and in the shade. We'll go ahead and pop the hood here and show you the underside and see what it looks like looking under the hood. Like I said, it has that removable rain tray. It was a little bit of a bear to get into place with just one person just because you have to align everything so perfectly. So, best idea is to have two people to help you hold that into place while you wrench everything down. But they include all the hardware you need in order to get that up into place. It really is an ingenious design. Looks a lot like the actual GT500 and installation really wasn't too bad. The cool part about Cervini's is that you actually are able to fish the windshield wiper line through the hood. You don't need to drill any holes in order to pin it into place like you do on the factory hood. You can get the washer nozzles and everything lined up. The factory washers work great and the only holes I had to drill were for the weather stripping, which everything was dimpled and I knew where to drill those holes. I put some duct tape around the drill bit, so I didn't go too deep. And honestly, I had this whole thing installed probably in less than an hour. Additionally, Cervini's also includes hardware to secure the factory hood latch from your old hood as well. It has hardware for the brackets on the bottom as well on either side, but again, they do include some adjustment in there so you can line it up perfectly. These cars are made by machines and people, so not everything is absolutely perfect. So, they include some adjustability in there to get that hood just perfect. So it looks great, almost factory on your GT350. Installing this hood might be a great idea if you plan to add a supercharger or any kind of forced induction in the future. You have this rain tray here that does come out, and you have all that additional cooling. You can get that heat especially if it's a Whipple or something like that. Get that heat out of the engine bay as quickly as possible. It's really an ingenious design and I'm really happy Cervini's has this offering, not only for all the S550's but also for some of the S197's as well. If you're looking for a way to make your GT350 stand out from the crowd, then the GT500 style hood from Cervini's is the way to go. If you're looking for hoods, spoilers, any kind of body parts, Cervini's is available right here at steeda.com! So go ahead and check out our website if you want to see more cool Ford and Mustang content. Go ahead and hit that subscribe and notification bell to get that notification on your phone. Comment below let us know what you think of the GT500 style hood from Cervini's, and don't forget the most important thing - Speed Matters!
View Full Transcript

Fitment & Features

Manufacturer:

Manufacturer: Cervini's

Installation Information:

Level of Difficulty: Medium
Install Time: About 1 1/2 Hours
Tools Required: Basic Shop Tools

Vehicle Fitment:

Fits Model Year: 2018, 2019, 2020, 2021

Customer Reviews

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

GT500 hood
Fantastic! Worth every penny, perfect fit and easy installation. Makes the car so much sharper. Had it wrapped in carbon fiber wrap it is SWEET!
Did you find this helpful? 
from Georgia on 10/21/2021
5
There are no reviews for this product!

Related Items

123123 - 0
Back to TOP
0 Items